Bypass Volt-Hi Setting - KStar 6K-H Manual

4.3.6 Bypass Volt-Hi setting

(Note: Inside the broken-line is the flashing part.)
When under the battery quantity setting press On▼ or when under
bypass voltage lower setting press Off▲, it goes to the bypass upper limit
setting. The bypass upper limit line flashes as in above picture.
•
Use button Enter to set the different bypass voltage upper limit.
The bypass voltage upper limit range is 5%,10%,15%,25%(25%
only for 220V output).
Press▲ or ▼ to exit the bypass voltage upper limit setting (save
•
the bypass voltage upper limit setting) and goes to battery
quantity setting or bypass voltage lower limit setting.
Bypass voltage upper limit setting
28