D-Link DSL-2740E User Manual page 78

DSL-2740E User Manual
The following table describes the parameters and buttons of this page.
Field
Multicast allowed Enable multicast proxy, only for route mode.
Allows tuning for the expected packet loss on a link. It
Robust Count determines how many times a startup query should
be xmitted.
Last Member This parameter specifies the times the device sends
Query Count the query message.
The device sends query messages to check IGMP
Query Interval
user periodically. The unit is second.
Query Response The device waits for the IGMP user's reply. The unit is
Interval 100 * millisecond.
The duration for the modem to cease forwarding
Group Leave multicast packets after a corresponding IGMP "Leave
Delay Group" message has been successfully offered to the
modem.
Click Apply Changes to save the settings.
Description
72