D-Link DSL-2740E User Manual page 88

Hide thumbs Also See for DSL-2740E:
Table of Contents

Advertisement

DSL-2740E User Manual
The following table describes the parameters and buttons of this page:
Field
Enable
Select it to use static IP routes.
Destination
Enter the IP address of the destination device.
Subnet Mask
Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to the
destination device.
Metric
The metric cost for the destination.
Interface
The interface for the specified route.
Add Route
Click it to add the new static route to the Static Route
Table.
Update
Select a row in the Static Route Table and modify the
parameters. Then click it to save the settings temporarily.
Delete
Select a row in the Static Route Table and click it to
Selected
delete the row.
Show
Click it, the IP Route Table appears. You can view a list
Routes
of destination routes commonly accessed by your
network.
Static Route
A list of the previously configured static IP routes.
Table
Click Show Routes, the page shown in the following figure appears. The table
shows a list of destination routes commonly accessed by your network.
Description
82

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents