D-Link DSL-2740E User Manual page 42

DSL-2740E User Manual
Field
SSID. Enter a descriptive name that is used when the
wireless client connecting to the modem.
Choose a channel from the drop-down list box.
A channel is the radio frequency used by 802.11b/g
wireless devices. There are 13 channels (from 1 to 13)
available depending on the geographical area. You
Channel
may have a choice of channels (for your region) and
Number
you should use a different channel from an adjacent AP
to reduce the interference. Interference and degrading
performance occurs when radio signal from different
APs overlap.
You can choose the transmission power of the radio
Radio Power
signal. The default one is 100%. It is recommended to
(Percent)
choose the default value100%.
Show Active Click it to view the information of the wireless clients
Clients connected to the modem.
Select the appropriate band of 20MHZ, 20/40MHZ, or
Channel Width 40MHZ according to your subscribed broadband
service.
Control Choose the channel selection mode as Upper or
Sideband Lower.
Click the button Show Active Clients to view the MAC address, transmission,
reception packet counters and encrypted status for each associated wireless client.
Description
36