Table of Contents
Advertisement
DSL-2740E User Manual
Field
If the type is set to Connect on Demand, you need
to enter the idle timeout time. Within the preset
Idle Time (min)
minutes, if the router does not detect the flow of the
user continuously, the router automatically
disconnects the PPPoE connection.
WAN IP Settings
You can choose Fixed IP or DHCP.
address, remote IP address and subnet mask.
Type
WAN IP address is assigned by the remote
DHCP server.
Enter the IP address of WAN interface provided by
Local IP Address
your ISP.
Remote IP
Enter the IP address of gateway provided by your
Address
ISP.
Netmask
Enter the subnet mask of the local IP address.
Routing table entry is not clearly specified in the
routing, as to any network prefix forwarding
Default Route
address.
Select this checkbox to enable IP unnumbered
Unnumbered
function.
After a PPPoE ATM VC is added to the table, click
page shown in the following figure appears. In this page, you can configure
parameters of this PPPoE PVC.
Description
If select Fixed IP, you should enter the local IP
If select DHCP, the router is a DHCP client, the
29
in the PPPoE mode, the
Hide quick links:
Advertisement
Table of Contents
