D-Link DSL-2740E User Manual page 26

DSL-2740E User Manual
The following table describes the parameters of this page.
Field
Specify the LAN global ipv6 address. It can be
Global Address
assigned by ISP.
Enable Enable or disable the Router Advertisement feature.
Enable or disable the "Managed address
M Flag
configuration" flag in RA packet.
Enable or disable the "Other configuration" flag in
O Flag
RA packet.
Specify the RA feature prefix mode:
"Auto": the RA prefix will use WAN dhcp-pd prefix;
Prefix Mode
"Manual": user will specify the prefix address,
length, preferred time and valid time.
Specify the dhcpv6 server mode:
"None": close dhcpv6 server;
"Manual": dhcpv6 server is opened and user
specifies the dhcpv6 server address pool and other
DHCPv6 Mode
parameters.
"Auto": dhcpv6 server is opened and it use WAN
dhcp-pd prefix to generate address pool.
3.2.2.3 DHCP Server
Choose Setup > Local Network > DHCP Server. The DHCP Server Setting page
shown in the following figure appears. You may configure the DHCP mode.
Description
20