DSL-2740E User Manual
Field
availability and readiness. A beacon interval is a period
of time (sent with the beacon) before sending the
beacon again. The beacon interval may be adjusted in
milliseconds (ms).
Sets the wake-up interval for clients in power-saving
DTIM Interval
mode.
This is the length of the CRC (Cyclic Redundancy
Check) block for communication between the router
Preamble Type
and wireless clients. High network traffic areas should
select Short preamble type.
Broadcast
With Disabled selected, no wireless clients will be able
SSID
to see your wireless network when they scan to see
what's available.
Click Apply Changes to save the settings.
3.3.1.2 Access Control
Choose Advanced > Advanced Wireless > Access Control. The page shown in
the following figure appears. Incoming connection can be filtered on your wireless
router based on their MAC addresses.
Description
44