D-Link DSL-2740E User Manual page 28

Hide thumbs Also See for DSL-2740E:
Table of Contents

Advertisement

DSL-2740E User Manual
Field
retains the assigned IP addresses before the IP
addresses change.
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system
Domain Name
name) on each individual PC. The domain name
can be assigned from the router through the DHCP
server.
You can configure the DNS server IP addresses for
DNS Servers
DNS Relay.
Click the button Show Client to display the page Active DHCP Client Table as
shown below. It shows the IP addresses assigned to DHCP clients.
The following table describes the parameters and buttons in this page:
Description
Field
It displays the IP address assigned to the DHCP
IP Address
client from the router.
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address.
MAC Address
The MAC address is assigned at the factory and it
consists of six pairs of hexadecimal character, for
Description
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents