D-Link DSL-2740E User Manual page 37

DSL-2740E User Manual
Field
Bridge
AC-Name
Service-Name
802.1q
Source Mac address
MAC Clone
Apply Changes
Return
Undo
3.2.3.2 ATM Settings
Choose Setup > Internet Setup > ATM Settings. The ATM Settings page
appears. You may configure the parameters for the ATM of your ADSL Router.
Here you may change the setting for VPI, VCI and QoS, etc.
Description
minutes, if the router does not detect the flow of
the user continuously, the router automatically
disconnects the PPPoE connection.
You can select Bridged Ethernet, Bridged
PPPoE, or Disable Bridge.
The accessed equipment type.
The service name.
You can select Disable or Enable. After enable
it, you need to enter the VLAN ID. The value
ranges from 1 to 4095.
The MAC address you want to clone.
Click it to enable the MAC Clone function with
the MAC address that is configured.
Click it to save the settings of this page
temporarily.
Click it to return to the Channel Configuration
page.
Click it to refresh this page.
31