How To View Bypassed Zones; Bypassing Faults Or Tamper Conditions; Isolating Zones; How To Isolate/Unisolate A Zone Via Text Keypad - Bosch amax 2100 Operation Manual

30 en | Bypassing/isolating
7.1.3

How to view bypassed zones

1.
2.
3.
7.2

Bypassing faults or tamper conditions

One or more faults or tamper conditions can be disabled for one
arming cycle. After bypassing a fault or tamper condition, you
can arm areas even when a fault or tamper condition exists.
Only zone tampers can not be bypassed.
How to bypass a fault or tamper condition
4
P
7.3

Isolating zones

7.3.1

How to isolate/unisolate a zone via text keypad

1.
2.
3.
4.
7.3.2 How to isolate/unisolate a zone via LED/LCD
keypad
1.
2017.04 | 07 | F.01U.295.569
Enter your code + [3] [3] and press [#].
The system beeps twice and the bypassed zones are
displayed.
Use [▲] and [▼] to display all bypassed zones.
Press [#] to exit.
Enter your code + [3] [4] and press [#].
The system beeps twice and fault or tamper conditions are
bypassed.
Enter your code + [3] [5] and press [#].
The STAY indicator flashes slowly. The available zones are
shown. Already isolated zones are checked. Unavailable
zones are marked with an x.
Use [▲] and [▼] to display all zones.
Select the zones you wish to isolate/unisolate with [*].
The selected zones are checked/unchecked.
Press [#] to confirm and exit.
Enter your code + [3] [5] and press [#].
The STAY indicator flashes slowly. The slowly flashing
number indicators show the isolated zones. If no numbers
are lit, no zones are isolated yet.
Bosch Sicherheitssysteme GmbH
AMAX panel