View Faulted Or Bypassed Points - Bosch Security System User Manual

View Faulted or Bypassed Points

To properly arm your system, all the doors and windows in the
system must be in the normal (not faulted) condition. Viewing
the faulted points helps you find faulted points and correct them
so proper arming is possible.
Your keypad offers two ways of displaying faulted and bypassed
point information. The first causes the faulted or bypassed point
information to scroll automatically through the display. The
second allows you to manually scroll through each individual
point description.
To automatically scroll faulted or bypassed points:
1. Ensure your keypad shows idle text.
2. Press any number key. If there are faulted points, AREA 1
## FAULT (## = total number of faulted points) is
displayed first. This display is followed by the point text
descriptions of the faulted points.
If there are bypassed points, AREA 1 ## BYPAS (## = total
number of bypassed points) is displayed, followed by the
point text descriptions of the bypassed points. These
displays scroll at the rate of 2 seconds each. If there are no
faulted or bypassed points, the displays does not appear.
Instead, the display shows NO FAULTS/BYPAS.
3. The display returns to idle text after scrolling through the
faulted and bypassed point information. Press ESC to stop
the display from scrolling.
To manually scroll faulted or bypassed points:
1. Ensure your keypad shows idle text.
2. Press the NEXT key repeatedly to display the faulted and
bypassed point information. If there are no faulted or
bypassed points the displays does not appear. Instead, the
display shows NO FAULTS/BYPAS.
3. You can return to idle text at any time by pressing ESC.