8-Port Gigabit Ethernet Spa Overview; 8-Port Gigabit Ethernet Spa Leds; 8-Port Gigabit Ethernet Spa Cables And Connectors; Sfp Module Connections - Cisco ASR 14000 Series Hardware Installation Manual

Chapter 3 Overview: Cisco ASR 14000 Series Router Shared Port Adapters

8-Port Gigabit Ethernet SPA Overview

The following sections describe the 8-Port Gigabit Ethernet SPA:
•
•

8-Port Gigabit Ethernet SPA LEDs

The 8-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each individual port and a
STATUS LED for the SPA, as shown in
Figure 3-14
1
Table 3-17
Table 3-17
LED Label
A/L
STATUS

8-Port Gigabit Ethernet SPA Cables and Connectors

The interface connectors on the 8-Port Gigabit Ethernet SPA are eight individual fiber-optic receivers
that support SFP modules. Each port can send and receive traffic using the optical fiber connections.

SFP Module Connections

The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit
Ethernet ports on the 8-Port Gigabit Ethernet SPA, linking the port with a fiber-optic network.
OL-17456-01
8-Port Gigabit Ethernet SPA LEDs, page 3-25
8-Port Gigabit Ethernet SPA Cables and Connectors, page 3-25
8-Port Gigabit Ethernet SPA Faceplate
1
A/L (Active/Link) LED
describes the 8-Port Gigabit Ethernet SPA LEDs.
8-Port Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Green
Amber
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
Figure 3-14.
2 STATUS LED
State Meaning
Off Port is not enabled.
On Port is enabled and the link is up.
On Port is enabled and the link is down.
Off SPA power is off.
On SPA is ready and operational.
On SPA power is on and good, and the SPA is being
configured.

8-Port Gigabit Ethernet SPA Overview

2
3-25