Oc-3 Module Connections - Cisco ASR 14000 Series Hardware Installation Manual

8-Port OC-12c/STM-4 Multirate POS SPA Overview
Figure 3-6
RX

OC-3 Module Connections

Table 3-6
Table 3-6
Specification
Wavelength
Cabling distance (maximum)
Operating case temperature range
TX power
Receiver sensitivity (maximum)
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
3-10
LC-Type Cable
TX
shows the OC-3 specifications of the optics on the 8-Port OC-12c/STM-4 Multirate POS SPA.
OC-3 Specifications
Chapter 3 Overview: Cisco ASR 14000 Series Router Shared Port Adapters
/ /
/ / / /
Description
OC-3 MM: 1270 nm to 1380 nm
OC-3 SR: 1260 nm to 1360 nm
OC-3 IR-1: 1261 nm to 1360 nm
OC-3 LR-1: 1263 nm to1360 nm
OC-3 LR-2: 1480 nm to 1580 nm
OC-3 MM: 2 km (1.2 miles)
OC-3 SR: 2 km (1.2 miles)
OC-3 IR-1: 15 km (9.3 miles)
OC-3 LR-1: 40 km (24.8 miles)
OC-3 LR-2: 80 km (49.7 miles)
OC-3 MM: 23 to 185 degrees F (–5 to 85 degrees C)
OC-3 SR: 23 to 185 degrees F (–5 to 85 degrees C)
OC-3 IR-1: 23 to 185 degrees F (–5 to 85 degrees C)
OC-3 LR-1: 23 to 185 degrees F (–5 to 85 degrees C)
OC-3 LR-2: 23 to 185 degrees F (–5 to 85 degrees C)
OC-3 MM: –19 to –14 dBm
OC-3 SR: –15 to –8 dBm
OC-3 IR-1: –15 to –8 dBm
OC-3 LR-1: –5 to 0 dBm
OC-3 LR-2: –5 to 0 dBm
OC-3 MM: –30 dBm
OC-3 SR: –23 dBm
OC-3 IR-1: –28 dBm
OC-3 LR-1: –34 dBm
OC-3 LR-2: –34 dBm
OL-17456-01