Page 1 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Cisco ASR 14000 Series Router System Management Command Reference Cisco IOS XR Software Release 3.7.1...
Page 2 OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
Page 3 Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
Page 4 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Cisco ASR 14000 Series Router System Management Command Reference...
Page 5 Bulk Content Downloader (BCDL) Commands on Cisco IOS XR Software The Bulk Content Downloader (BCDL) provides the Cisco IOS XR software with high-performance downloading capabilities. This capability is used by the following internal applications: IPv4 and IPv6 unicast routing protocols—to provide the ability to download forwarding information •...
Page 6 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 7 Bulk Content Downloader (BCDL) Commands on Cisco IOS XR Software show bcdl C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 8 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 9 Bulk Content Downloader (BCDL) Commands on Cisco IOS XR Software show bcdl consumers C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 10 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 11 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 12 Bulk Content Downloader (BCDL) Commands on Cisco IOS XR Software show bcdl tables C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 13 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 14 Bulk Content Downloader (BCDL) Commands on Cisco IOS XR Software show bcdl trace C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 15 Boot Commands on Cisco IOS XR Software This chapter describes the commands used to boot or reset Cisco IOS XR software. For more information about boot tasks, see Cisco ASR 14000 Series Routers Getting Started Guide. Cisco ASR 14000 Series Router System Management Command Reference...
Page 16 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 17 Examples The following example shows how to set the configuration register on the DSC to 0x2. Setting the configuration registration to 0x2 causes the router to boot the Cisco IOS XR software and enter EXEC mode during a router reload.
Page 18 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 19 Description format Formats a file system. mirror pause Temporarily pauses disk mirroring on a node. mirror resume Resumes disk mirroring on a node after it has been temporarily stopped. Cisco ASR 14000 Series Router System Management Command Reference SMR-15 OL-17231-01...
Page 20 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 21 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 22 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 23 If a standby RP is not installed or is not in the ready state, then the router experiences a loss of service while the active RP is reloading the Cisco IOS XR software. To view the status of the standby RP, issue the show redundancy command in EXEC mode.
Page 24 Defines the configuration register setting in administration EXEC mode. reload (administration Performs a reload of a single node or all nodes in the system. EXEC) show redundancy Displays the redundancy status of the RPs. Cisco ASR 14000 Series Router System Management Command Reference SMR-20 OL-17231-01...
Page 25 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. Before reloading nodes on a Cisco ASR 14000 Series Router router, we recommend using the cfs check Note command to check the sanity of the configuration file system and attempt to recover from internal inconsistencies.
Page 26 Verifies the Configuration File System (CFS). config-register Defines the configuration register setting in administration EXEC mode. reload Performs a reload of the route processor. show redundancy Displays the redundancy status of the RPs. Cisco ASR 14000 Series Router System Management Command Reference SMR-22 OL-17231-01...
Page 27 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 28 In this sample output, the time stamp following the @ sign is the elapsed time in the format hh:mm:ss since the execution phase started (for example, since node start, in the case of a boot). Cisco ASR 14000 Series Router System Management Command Reference SMR-24...
Page 29 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 30 Available—Disk exists in router and is available. Not present—Disk does not exist in router. “a” partitions of disks are only available after the disk has been formatted with the partition keyword. Cisco ASR 14000 Series Router System Management Command Reference SMR-26 OL-17231-01...
Page 31 If it is set to P, then mirroring is paused. If empty, mirroring is not enabled. Related Commands Command Description mirror Configures disk mirroring on a node. mirror verify Verifies disk synchronization for disk mirroring on a node. Cisco ASR 14000 Series Router System Management Command Reference SMR-27 OL-17231-01...
Page 32 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 33 Thread ID 1 on cpu 0 pkg/bin/l3test Thread ID 0 on cpu 1 REGISTER INFO 01000000 4817e8c0 4820e208 000000de fc1b4856 7fffffff 4817e738 fc1b4856 00000000 602cf522 00000000 00000000 602cf51c 4820e1a0 00000000 00000000 Cisco ASR 14000 Series Router System Management Command Reference SMR-29 OL-17231-01...
Page 34 Exception Handling Registers Data Addr Reg # DSISR 0x602cf440 # 0x42000000 SPRG0 # SPRG1 # SPRG2 # SPRG3 0x1 # 0x21000010 # 0x6029b000 # SaveNRestore SRR0 # SaveNRestore SRR1 Cisco ASR 14000 Series Router System Management Command Reference SMR-30 OL-17231-01...
Page 35 MSSCR0 # 0x88000 MSSSR0 # STACK TRACE #0 0xfc194290 #1 0x48200738 #2 0x482013cc #3 0x48201c04 #4 0xfc1d4fb0 Related Commands Command Description reload Performs a reload of the route processor. Cisco ASR 14000 Series Router System Management Command Reference SMR-31 OL-17231-01...
Page 36 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 37 SDR configuration last commit record on disk1: Device Commitid Time Stamp disk1: 1000000030 11:56:43 UTC Thu Jun 22 2006 Active software packages on disk1: asr14k-os-mbi-3.4.0 asr14k-base-3.4.0 asr14k-admin-3.4.0 asr14k-fwdg-3.4.0 asr14k-lc-3.4.0 asr14k-rout-3.4.0 asr14k-diags-3.4.0 asr14k-k9sec-3.4.0 asr14k-mcast-3.4.0 asr14k-mgbl-3.4.0 asr14k-sbc-3.4.0 Cisco ASR 14000 Series Router System Management Command Reference SMR-33 OL-17231-01...
Page 38 Defines the order of boot devices used to bring up a router. The secondary device argument also defines the default backup target device used by the system backup command. system backup Performs a backup of software and configuration files. Cisco ASR 14000 Series Router System Management Command Reference SMR-34 OL-17231-01...
Page 39 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 40 Defines the configuration register setting in administration EXEC mode. show variables system Displays internal system environmental variables set on the router. show version Displays information about the Cisco IOS XR software. Cisco ASR 14000 Series Router System Management Command Reference SMR-36 OL-17231-01...
Page 41 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 42 Displays the configuration register setting and boot file setting for the RPs in the system. show version Displays information about the Cisco IOS XR software. Cisco ASR 14000 Series Router System Management Command Reference SMR-38 OL-17231-01...
Page 43 The backup files are copied to the secondary device defined with the system boot-sequence command. The backup files are copied to the target device on the current secure domain router system controller (DSDRSC). Command Modes EXEC Administration EXEC Cisco ASR 14000 Series Router System Management Command Reference SMR-39 OL-17231-01...
Page 44 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 45 Defines the order of boot devices used to bring up a router. The secondary device argument also defines the default backup target device used by the system backup command. system backup Performs a backup of software and configuration files. Cisco ASR 14000 Series Router System Management Command Reference SMR-41 OL-17231-01...
Page 46 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 47 RP (DSC). In this example, the default location for software and configurations is disk0. The location for backups of software and configurations is disk1. RP/0/RP0/CPU0:router# admin RP/0/RP0/CPU0:router(admin)# system boot-sequence disk0: disk1: Info: node0_0_CPU0: command succeeded. Cisco ASR 14000 Series Router System Management Command Reference SMR-43 OL-17231-01...
Page 48 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description system backup Performs a backup of software and configuration files. show system backup Displays the system backup settings and history. Cisco ASR 14000 Series Router System Management Command Reference SMR-44 OL-17231-01...
Page 49 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 CDP Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR software commands for monitoring the networking device and network using Cisco Discovery Protocol (CDP).
Page 50 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 To enable the Cisco Discovery Protocol (CDP) globally or on a interface, use the cdp command in the appropriate configuration mode.
Page 51 The following example shows how to disable CDP on Packet-over-SONET/SDH (POS) interface 0/0/0/1: RP/0/RP0/CPU0:router(config)# interface POS 0/0/0/1 RP/0/RP0/CPU0:router(config-if)# no cdp Related Commands Command Description show cdp Displays global CDP information, including timer and holdtime information. Cisco ASR 14000 Series Router System Management Command Reference SMR-49 OL-17231-01...
Page 52 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 cdp advertise v1 To change the version of Cisco Discovery Protocol (CDP) that is used to communicate with neighboring devices to version 1 (CDPv1), use the cdp advertise v1 command in global configuration mode. To remove the cdp advertise v1 command from the configuration file and restore the system to its default condition with respect to this command, use the no form of this command.
Page 53 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description Enables CDP on a supported interface. show cdp Displays global CDP information, including timer and holdtime information. Cisco ASR 14000 Series Router System Management Command Reference SMR-51 OL-17231-01...
Page 54 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 cdp holdtime To specify the time for which the receiving device should hold a Cisco Discovery Protocol (CDP) packet from your networking device before discarding it, use the cdp holdtime command in global configuration mode.
Page 55 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description cdp timer Specifies how often the software sends CDP updates. show cdp Displays global CDP information, including timer and holdtime information. Cisco ASR 14000 Series Router System Management Command Reference SMR-53 OL-17231-01...
Page 56 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 cdp log adjacency changes To log changes to the Cisco Discovery Protocol (CDP) adjacency table, use the cdp log adjacency changes command in global configuration mode. To disable the logging, use the no form of this command.
Page 57 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description show cdp Displays global CDP information, including timer and holdtime information. Cisco ASR 14000 Series Router System Management Command Reference SMR-55 OL-17231-01...
Page 58 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 cdp timer To specify how often the software sends Cisco Discovery Protocol (CDP) updates, use the cdp timer command in global configuration mode. To remove the cdp timer global configuration command from the configuration file and restore the system to its default condition with respect to this command, use the no form of this command.
Page 59 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 clear cdp counters To reset Cisco Discovery Protocol (CDP) traffic counters to zero (0), use the clear cdp counters command in EXEC mode.
Page 60 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 clear cdp table To clear and automatically resize the table that contains Cisco Discovery Protocol (CDP) information about neighbors, use the clear cdp table command in EXEC mode.
Page 61 Sending CDPv2 advertisements is enabled Related Commands Command Description show cdp Displays global CDP information, including timer and holdtime information. show cdp neighbors Displays information about neighboring devices discovered by CDP. Cisco ASR 14000 Series Router System Management Command Reference SMR-59 OL-17231-01...
Page 62 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 show cdp To display global Cisco Discovery Protocol (CDP) information, including CDP version, timer, and holdtime information, use the show cdp command in EXEC mode.
Page 63 Displays information about the interfaces on which CDP is enabled. show cdp neighbors Displays information about neighboring devices discovered by CDP. show cdp traffic Displays traffic information between devices gathered using CDP. Cisco ASR 14000 Series Router System Management Command Reference SMR-61 OL-17231-01...
Page 64 To display information about a specific neighboring device or all neighboring devices discovered using Cisco Discovery Protocol (CDP), use the show cdp entry command in EXEC mode. show cdp entry {* | entry-name} [protocol | version] Syntax Description Displays all CDP neighbors.
Page 65 Displays information about the interfaces on which CDP is enabled. show cdp neighbors Displays information about neighboring devices discovered by CDP. show cdp traffic Displays traffic information between devices gathered using CDP. Cisco ASR 14000 Series Router System Management Command Reference SMR-63 OL-17231-01...
Page 66 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 show cdp interface To display information about the interfaces on which Cisco Discovery Protocol (CDP) is enabled, use the show cdp interface command in EXEC mode.
Page 67 Holdtime is 180 seconds Time for which the device directs the neighbor to hold a CDP advertisement before discarding it. This field is controlled by the cdp holdtime command. Cisco ASR 14000 Series Router System Management Command Reference SMR-65 OL-17231-01...
Page 68 Displays information about a specific neighboring device or all neighboring devices discovered using CDP. show cdp neighbors Displays information about neighboring devices discovered by CDP show cdp traffic Displays traffic information between devices gathered using CDP. Cisco ASR 14000 Series Router System Management Command Reference SMR-66 OL-17231-01...
Page 69 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 show cdp neighbors To display detailed information about neighboring devices discovered using Cisco Discovery Protocol (CDP), use the show cdp neighbors command in EXEC mode.
Page 70 Protocol and port number of the device. The following is sample output for IPv4 and IPv6 neighbors from the show cdp neighbors detail command: RP/0/RP0/CPU0:router# show cdp neighbor detail ------------------------- Cisco ASR 14000 Series Router System Management Command Reference SMR-68 OL-17231-01...
Page 71 Displays information about a specific neighboring device or all neighboring devices discovered using CDP. show cdp interface Displays information about the interfaces on which CDP is enabled. show cdp traffic Displays traffic information between devices gathered using CDP. Cisco ASR 14000 Series Router System Management Command Reference SMR-69 OL-17231-01...
Page 72 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 show cdp traffic To display information about the traffic gathered between devices using Cisco Discovery Protocol (CDP), use the show cdp traffic command in EXEC mode.
Page 73 Number of packets received from a CDP version that was outside the current configuration. File open failed Number of times that CDP failed to connect to one of the underlying services it uses. Cisco ASR 14000 Series Router System Management Command Reference SMR-71 OL-17231-01...
Page 74 Displays information about a specific neighboring device or all neighboring devices discovered using CDP. show cdp interface Displays information about the interfaces on which CDP is enabled. show cdp neighbors Displays information about neighboring devices discovered by CDP. Cisco ASR 14000 Series Router System Management Command Reference SMR-72 OL-17231-01...
Page 75 This chapter describes the commands used to set and display the internal clock settings in the Cisco IOS XR software. For more information about manually setting the router clock, see Cisco ASR 14000 Series Router Getting Started Guide. Cisco ASR 14000 Series Router System Management Command Reference...
Page 76 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 77 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Command Description show clock Displays the clock settings. update-calendar Periodically updates the calendar from NTP. Cisco ASR 14000 Series Router System Management Command Reference SMR-75 OL-17231-01...
Page 78 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 79 Description clock summer-time Configures the system to switch automatically to summer time (daylight saving time). clock timezone Sets the time zone for display. show clock Displays the clock settings. Cisco ASR 14000 Series Router System Management Command Reference SMR-77 OL-17231-01...
Page 80 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 81 RP/0/RP0/CPU0:router(config)# clock summer-time PDT date 12 October 2005 2:00 26 April 2006 2:00 Related Commands Command Description clock set Sets the software clock settings. clock timezone Sets the time zone for display. Cisco ASR 14000 Series Router System Management Command Reference SMR-79 OL-17231-01...
Page 82 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 83 UTC, and the letter J (Juliet) is used to refer to the local time zone. Using this method, the International Date Line is between time zones M and Y. Cisco ASR 14000 Series Router System Management Command Reference SMR-81...
Page 84 The following example shows how to set the time zone to Atlantic Time (AT) for Newfoundland, Canada, which is 3.5 hours behind UTC: RP/0/RP0/CPU0:router(config)# clock timezone AT -3 30 Cisco ASR 14000 Series Router System Management Command Reference SMR-82 OL-17231-01...
Page 85 Sets the software clock settings. clock summer-time Configures the system to switch automatically to summer time (daylight saving time). clock timezone Sets the time zone for display. show clock Displays the clock settings. Cisco ASR 14000 Series Router System Management Command Reference SMR-83 OL-17231-01...
Page 86 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 87 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 88 The following example shows how to set the country of use to Australia: RP/0/RP0/CPU0:router(config)# locale country au Related Commands Command Description locale language Sets the default language of use. Cisco ASR 14000 Series Router System Management Command Reference SMR-86 OL-17231-01...
Page 89 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 90 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description locale country Sets the default country of use. Cisco ASR 14000 Series Router System Management Command Reference SMR-88 OL-17231-01...
Page 91 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 92 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description clock set Sets the software clock settings. Cisco ASR 14000 Series Router System Management Command Reference SMR-90 OL-17231-01...
Page 93 Configuration Management Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR software commands used to manage your basic configuration. For detailed information about configuration management concepts, tasks, and examples, see Cisco ASR 14000 Series Router Getting Started Guide.
Page 94 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 95 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 96 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. Cisco IOS XR software supports generic alias definitions for various entities. Any physical or logical entity can have an alias as a reference. For example, an alias can refer to a command, a partial command, a group of commands, a location, or an IP address.
Page 97 Loopback999 unassigned MgmtEth0/0/CPU0/0 12.29.56.21 RP/0/RP0/CPU0:router# The following example shows how to define an alias, cisco’s-pos, for interface POS1/0/2/3 and then how to use that alias to shut down the interface: RP/0/RP0/CPU0:router(config)# alias cisco's-pos POS1/0/2/3 RP/0/RP0/CPU0:router(config)# interface cisco's-pos RP/0/RP0/CPU0:router(config-if)# shutdown RP/0/RP0/CPU0:router(config-if)# exit...
Page 98 RP/0/RP0/CPU0:router(exec)# shint_both(POS1/2/3/4) Two commands are issued, as follows: RP/0/RP0/CPU0:router(exec)# show interface POS1/2/3/4; show run interface POS1/2/3/4 Related Commands Command Description show aliases Displays a summary of all command aliases. Cisco ASR 14000 Series Router System Management Command Reference SMR-96 OL-17231-01...
Page 99 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 100 Configuration Management Commands on Cisco IOS XR Software apply-template Related Commands Command Description end-template Exits template configuration mode. show running-config Displays the current running (active) configuration. template Defines a template. Cisco ASR 14000 Series Router System Management Command Reference SMR-98 OL-17231-01...
Page 101 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 102 Configuration Management Commands on Cisco IOS XR Software clear (EXEC) Related Commands Command Description clear (global) Discards changes to the target configuration that have not yet been committed, without exiting the configuration session. Cisco ASR 14000 Series Router System Management Command Reference SMR-100 OL-17231-01...
Page 103 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 104 Terminates a session and returns the router to EXEC mode from any configuration mode. exit Exits from the current configuration mode to the next higher command mode or logs out from the terminal session. Cisco ASR 14000 Series Router System Management Command Reference SMR-102 OL-17231-01...
Page 105 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 106 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 107 Rolls back the configuration to a previous commit. show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-105 OL-17231-01...
Page 108 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 109 RP/0/RP0/CPU0:router# show configuration history alarm Sno. Event Info Time Stamp ~~~~ ~~~~~ ~~~~ ~~~~~~~~~~ alarm inconsistency alarm raised Thu Jun 22 15:23:15 2006 alarm inconsistency alarm cleared Thu Jun 22 15:42:30 2006 Cisco ASR 14000 Series Router System Management Command Reference SMR-107 OL-17231-01...
Page 110 Displays information about a configuration that failed at startup. failed startup show configuration Displays a history of the configuration inconsistency alarms that were set or history alarm cleared. Cisco ASR 14000 Series Router System Management Command Reference SMR-108 OL-17231-01...
Page 111 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 112 EXEC mode: RP/0/RP0/CPU0:Router# clear configuration inconsistency replica location 0/rp1/cpu0 The replica has been repaired. Related Commands Command Description show configuration Displays configuration inconsistencies on a standby node. inconsistency replica Cisco ASR 14000 Series Router System Management Command Reference SMR-110 OL-17231-01...
Page 113 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 114 Configuration Management Commands on Cisco IOS XR Software clear configuration sessions RP/0/RP0/CPU0:router# clear configuration sessions 00000211-002c409b-00000000 session ID '00000211-002cb09b-00000000' terminated Related Commands Command Description show configuration sessions Displays the active configuration sessions. Cisco ASR 14000 Series Router System Management Command Reference SMR-112 OL-17231-01...
Page 115 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 116 The comment is then displayed in the output of the show configuration commit list detail command. RP/0/RP0/CPU0:router# configure RP/0/RP0/CPU0:router(config)# hostname router2 RP/0/RP0/CPU0:router(config)# commit comment new name for router Cisco ASR 14000 Series Router System Management Command Reference SMR-114 OL-17231-01...
Page 117 Related Commands Command Description abort Ends a configuration session without saving changes to the target configuration. clear (EXEC) Resets command functions in administration EXEC mode or in EXEC mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-115 OL-17231-01...
Page 118 Populates the target configuration with the contents of a previously saved configuration file. show configuration rollback Displays changes that would be made by the rollback configuration changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-116 OL-17231-01...
Page 119 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 120 Configuration Management Commands on Cisco IOS XR Software configuration commit auto-save Related Commands Command Description commit Merges the target configuration to the running configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-118 OL-17231-01...
Page 121 IDs. Configuration modes are used to enter changes to a target configuration session, and commit those changes to the running configuration. A router running Cisco IOS XR software contains multiple configurations: The configuration for the router. This mode is used to configure router-specific features such as •...
Page 122 Resets command functions in administration EXEC mode or in EXEC mode. clear (global) Discards changes to the target configuration that have not yet been committed, without exiting the configuration session. Cisco ASR 14000 Series Router System Management Command Reference SMR-120 OL-17231-01...
Page 123 Exits from the current configuration mode to the next higher command mode or logs out of the terminal session. show configuration (config) Displays the contents of the target configuration. show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-121 OL-17231-01...
Page 124 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 125 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 126 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 127 Exits from the current configuration mode to the next higher command mode or logs out of the terminal session. show configuration (config) Displays the contents of the target configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-125 OL-17231-01...
Page 128 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 129 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 130 Ends a configuration session without saving changes to the target configuration. commit Merges the target configuration to the running configuration. Terminates a session and returns the router to EXEC mode from any configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-128 OL-17231-01...
Page 131 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 132 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 133 10.10.11.20 255.0.0.0 Related Commands Command Description commit Merges the target configuration to the running configuration. show configuration Displays syntax errors that occurred during the last load operation. failed load Cisco ASR 14000 Series Router System Management Command Reference SMR-131 OL-17231-01...
Page 134 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 135 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 136 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 137 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 138 Configuration Management Commands on Cisco IOS XR Software The Cisco IOS XR software provides online help for standard Cisco IOS XR command-line interface (CLI) commands using manual (man) pages. To display manual pages, use the man command in EXEC mode.
Page 139 To use the arp timeout command, you must be a member of a user group associated with the cef task ID. For detailed information about user groups and task IDs, refer to the Cisco ASR 14000 Series Router System Management Command Reference SMR-137 OL-17231-01...
Page 140 Configuration Management Commands on Cisco IOS XR Software Configuring AAA Services on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide. This command is ignored when issued on interfaces that do not use ARP. Also, ARP entries that correspond to the local interface or that are statically configured by the user never time out.
Page 141 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 142 !! Last configuration change at 15:52:55 UTC Fri Feb 13 2004 by UNKNOWN line console exec-timeout 0 0 interface MgmtEth0/RP1/CPU0/0 ipv4 address 10.32.45.154 255.0.0.0 interface POS0/1/0/0 ipv4 address 10.32.45.155 255.0.0.0 keepalive disable interface POS0/1/0/1 ipv4 address 10.32.45.156 255.0.0.0 keepalive disable Cisco ASR 14000 Series Router System Management Command Reference SMR-140 OL-17231-01...
Page 143 The command usage is more disk0:config.backup | include log. At the --More-- prompt, a new search is specified that begins with output lines that contain the regular expression “aaa.” Cisco ASR 14000 Series Router System Management Command Reference SMR-141 OL-17231-01...
Page 144 10.10.1.1 255.255.255.255 interface Loopback200 ipv4 address 10.20.1.1 255.255.255.255 interface pos0/0/0/0 ipv4 address 10.30.1.1 255.255.0.0 keepalive 100 interface preconfigure POS0/1/0/1 shutdown Related Commands Command Description show Displays system status and configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-142 OL-17231-01...
Page 145 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 146 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 147 Configuration successfully rolled back 2 commits. Related Commands Command Description show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-145 OL-17231-01...
Page 148 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 149 RP/0/RP0/CPU0:router(config)# show conf Building configuration... template test username xyz end-template The root command is not available from the template submode, but is available in the submodes configurable under the template submode. Cisco ASR 14000 Series Router System Management Command Reference SMR-147 OL-17231-01...
Page 150 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 151 Displays information about the configuration commits stored in the commit commit list database. show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-149 OL-17231-01...
Page 152 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 153 Displays information about the configuration commits stored in the commit commit list database. show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-151 OL-17231-01...
Page 154 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 155 Display history of configuration changes. history show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-153 OL-17231-01...
Page 156 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 157 Display history of configuration changes. history show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-155 OL-17231-01...
Page 158 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 159 Display history of configuration changes. history show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-157 OL-17231-01...
Page 160 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 161 Display history of configuration changes. history show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-159 OL-17231-01...
Page 162 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 163 Display history of configuration changes. history show configuration Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-161 OL-17231-01...
Page 164 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 165 Sets the default SAFI for the current session. set default-vrf Sets the default VRF settings for the current session. show default-afi-safi-vrf Displays the default AFI, SAFI, and VRF settings for the current session. Cisco ASR 14000 Series Router System Management Command Reference SMR-163 OL-17231-01...
Page 166 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 167 Sets the default AFI settings for the current session. set default-vrf Sets the default VRF settings for the current session. show default-afi-safi-vrf Displays the default AFI, SAFI, and VRF settings for the current session. Cisco ASR 14000 Series Router System Management Command Reference SMR-165 OL-17231-01...
Page 168 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 169 Sets the default AFI settings for the current session. set default-safi Sets the default SAFI for the current session. show default-afi-safi-vrf Displays the default AFI, SAFI, and VRF settings for the current session. Cisco ASR 14000 Series Router System Management Command Reference SMR-167 OL-17231-01...
Page 170 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 171 0 drops for unrecognized upper-level protocol FastEthernet0/RP0/CPU0/0 is administratively down, line protocol is administratively down FastEthernet0/RP0/CPU0/0 is administratively down, line protocol is administratively down 0 drops for unrecognized upper-level protocol Cisco ASR 14000 Series Router System Management Command Reference SMR-169 OL-17231-01...
Page 172 120 120 logging trap --More-- /ipv4 filtering... route ipv4 0.0.0.0 255.255.0.0 pos0/2/0/0 interface pos0/2/0/0 ipv4 address 172.19.73.215 255.255.0.0 Related Commands Command Description more Displays output from a text file. Cisco ASR 14000 Series Router System Management Command Reference SMR-170 OL-17231-01...
Page 173 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 174 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 175 Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. show configuration Displays the active configuration sessions. sessions show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-173 OL-17231-01...
Page 176 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 177 - interface GigabitEthernet0/2/0/1 shutdown - interface GigabitEthernet0/2/0/2 shutdown - interface POS0/3/0/0 description shutdown - interface POS0/4/0/0 shutdown - router static address-family ipv4 unicast 0.0.0.0/0 255.255.255.224 - xml agent corba hostname router Cisco ASR 14000 Series Router System Management Command Reference SMR-175 OL-17231-01...
Page 178 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 179 In the display, the following symbols signify changes: + indicates an added line. - indicates a deleted line. # indicates a modified line. router# show configuration commit changes last 1 diff Cisco ASR 14000 Series Router System Management Command Reference SMR-177 OL-17231-01...
Page 180 Rolls back the configuration to a previous commit. show configuration rollback Displays changes that would be made by the rollback changes configuration command or displays the list of commit IDs. Cisco ASR 14000 Series Router System Management Command Reference SMR-178 OL-17231-01...
Page 181 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 182 Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. show configuration Displays the active configuration sessions. sessions show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-180 OL-17231-01...
Page 183 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 184 Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. show configuration Displays the active configuration sessions. sessions show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-182 OL-17231-01...
Page 185 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 186 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 187 Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. show configuration Displays the active configuration sessions. sessions show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-185 OL-17231-01...
Page 188 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 189 Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. show configuration Displays the active configuration sessions. sessions show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-187 OL-17231-01...
Page 190 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 191 Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. show configuration Displays the active configuration sessions. sessions show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-189 OL-17231-01...
Page 192 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 193 After an upgrade to Cisco IOS XR Release 3.6, the show configuration history command in administration EXEC mode does not display any information from before the upgrade. To see information about commits prior to the upgrade, use the show configuration commit list command in administration EXEC mode.
Page 194 The management interface used to make the event. Related Commands Command Description show configuration Displays the contents of the target configuration. (config) show configuration Displays the contents of the committed configuration. running Cisco ASR 14000 Series Router System Management Command Reference SMR-192 OL-17231-01...
Page 195 Displays changes that would be made by the rollback configuration rollback changes command or displays the list of commit IDs. show configuration Displays the active configuration sessions. sessions show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-193 OL-17231-01...
Page 196 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 197 Configuration Management Commands on Cisco IOS XR Software show configuration inconsistency replica Replica is consistent Related Commands Command Description clear configuration inconsistency Resolves configuration inconsistencies on a replica node. replica Cisco ASR 14000 Series Router System Management Command Reference SMR-195 OL-17231-01...
Page 198 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 199 1 preempt delay 300 interface TenGigE0/1/0/1.2 vrrp 1 preempt delay 300 interface TenGigE0/1/0/1.3 vrrp 1 preempt delay 300 Related Commands Command Description show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-197 OL-17231-01...
Page 200 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 201 Displays changes that would be made by the rollback changes configuration command or displays the list of commit IDs. show configuration sessions Displays the active configuration sessions. show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-199 OL-17231-01...
Page 202 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 203 1 diff Building configuration... interface Loopback1000 ipv4 address 1.1.1.1 255.255.255.255 Related Commands Command Description rollback configuration Rolls back the configuration to a previous commit. Cisco ASR 14000 Series Router System Management Command Reference SMR-201 OL-17231-01...
Page 204 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 205 Displays changes that would be made by the rollback changes configuration command or displays the list of commit IDs. show configuration sessions Displays the active configuration sessions. show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-203 OL-17231-01...
Page 206 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 207 Displays changes that would be made by the rollback changes configuration command or displays the list of commit IDs. show configuration sessions Displays the active configuration sessions. show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-205 OL-17231-01...
Page 208 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 209 Locked running-configuration. An asterisk, *, displayed in this field means the session has been locked. Only one session can lock the running configuration at a time. Related Commands Command Description clear configuration sessions Clears an active configuration session. Cisco ASR 14000 Series Router System Management Command Reference SMR-207 OL-17231-01...
Page 210 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 211 Sets the default AFI setting for the current session. set default-safi Sets the default SAFI setting for the current session. set default-vrf Sets the default VRF setting for the current session. Cisco ASR 14000 Series Router System Management Command Reference SMR-209 OL-17231-01...
Page 212 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 213 Configuration Management Commands on Cisco IOS XR Software show history RP/0/RP0/CPU0:router(config)# show history interface pos 0/1/0/0 ipv4 address 10.0.0.0 root describe line default autocommand config line default autocommand configure show history Cisco ASR 14000 Series Router System Management Command Reference SMR-211 OL-17231-01...
Page 214 You can display either the entire running configuration or a subset of the running configuration. The subset may be all the commands within a specified command mode. In Cisco IOS XR software, the running configuration is automatically used at system startup, reset, or Note power cycle.
Page 215 The sanitized configuration can be used to share a configuration without exposing some configuration details. RP/0/RP1/CPU0:router# show running-config sanitized Building configuration... !! Last configuration change at 05:26:50 UTC Thu Jan 19 2006 by <removed> Cisco ASR 14000 Series Router System Management Command Reference SMR-213 OL-17231-01...
Page 216 Loopback10 interface Loopback1000 --More-- Related Commands Command Description show configuration (config) Displays the contents of the target configuration. show configuration Displays the contents of the running configuration. running-config Cisco ASR 14000 Series Router System Management Command Reference SMR-214 OL-17231-01...
Page 217 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 218 Configuration Management Commands on Cisco IOS XR Software show xml schema Command Description copy xml-schema Copies the XML schema files on the router as a tar ball file (.tar.gz). Cisco ASR 14000 Series Router System Management Command Reference SMR-216 OL-17231-01...
Page 219 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 220 10.3.32.154 255.0.0.0 end-template Related Commands Command Description apply-template Applies a template to the target configuration. end-template Exits template configuration mode. show running-config Displays the current running (active) configuration. Cisco ASR 14000 Series Router System Management Command Reference SMR-218 OL-17231-01...
Page 221 This chapter describes the Cisco IOS XR software commands used to manage file systems. Caution The commands in this chapter should not be used to access or modify any Cisco IOS XR software or configuration files. Use only the documented commands for installing and configuring the router.
Page 222 Command History Releases Modifications Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 223 Command Description Displays the contents of a file system. Displays the current working directory of the cd command. show filesystem Displays the layout and contents of a file system. Cisco ASR 14000 Series Router System Management Command Reference SMR-221 OL-17231-01...
Page 224 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 225 Copies to all nodes. running-config Applies the source configuration file to the running configuration of the system. atomic (Optional) Applies the changes to the running configuration only if there are no errors Cisco ASR 14000 Series Router System Management Command Reference SMR-223 OL-17231-01...
Page 226 " ( ) * , / : < > ? \ | The maximum length allowed by the Cisco ASR 14000 Series Router router for a filename is 254 characters including the path. If a filename longer than 254 characters is specified, the filename is truncated to 254 characters.
Page 227 Example: RP/0/RP0/CPU0:router# copy tftp://1.1.1.1/images/casr14k-mcast-p.pie disk1: Some Cisco IOS XR software images may be larger than 32 MB, and the TFTP services provided by Note some vendors may not support a file this large. If you do not have access to a TFTP server that supports files larger than 32 MB, download the software image using FTP or rcp as described in the following sections.
Page 228 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Using FTP FTP servers require a username and password for each client request. Cisco IOS XR software sends the first valid username in the following list: The username and password specified in the copy command, if a username is specified.
Page 229 This means that even if one error occurs in the parsing or committing phase, no changes are made to the system. To view any errors when applying the configuration, use the show configuaration failed command. Cisco ASR 14000 Series Router System Management Command Reference SMR-227 OL-17231-01...
Page 230 Changes the default directory or file system. Displays the contents of a file system. show configuration failed Displays information about a configuration that failed during the last (config) commit. Cisco ASR 14000 Series Router System Management Command Reference SMR-228 OL-17231-01...
Page 231 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 232 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description Changes the default directory or file system. Displays the contents of a file system. Cisco ASR 14000 Series Router System Management Command Reference SMR-230 OL-17231-01...
Page 233 Command History Releases Modifications Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 234 Command Description Changes the default directory or file system. Displays the current working directory of the cd command. show filesystem Displays the layout and contents of a file system. Cisco ASR 14000 Series Router System Management Command Reference SMR-232 OL-17231-01...
Page 235 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 236 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 237 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description delete Deletes a file from a flash memory device. Cisco ASR 14000 Series Router System Management Command Reference SMR-235 OL-17231-01...
Page 238 (Optional) Forces a monlib update, without verifying the monlib version on the device. recover (Optional) Recovers any sector read errors on a flash disk. Defaults The default monlib file is the one included with the Cisco IOS XR software. spare-number: 0 Command Modes EXEC Administration EXEC...
Page 239 Format will destroy all data on "disk1:". Continue? [confirm] Note When the console returns to the EXEC prompt, the new flash disk has been formatted and is ready for use. Cisco ASR 14000 Series Router System Management Command Reference SMR-237 OL-17231-01...
Page 240 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description fsck Checks a file system for a damage and repairs any problems. Cisco ASR 14000 Series Router System Management Command Reference SMR-238 OL-17231-01...
Page 241 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 242 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. After you issue the mkdir command, Cisco IOS XR software prompts you to specify the name of the directory to be created. When specifying the name of the new directory, include the directory path where you want the new directory to reside.
Page 243 Mon Jan 26 23:45:56 2004 cf.dat 39929724928 bytes total (39883231232 bytes free) Related Commands Command Description Displays the contents of a file system. rmdir Removes an existing directory in a flash file system. Cisco ASR 14000 Series Router System Management Command Reference SMR-241 OL-17231-01...
Page 244 Command History Releases Modifications Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 245 Use the rmdir command to remove directories (for example, to free up disk space) from a file system. After you issue the rmdir command, the Cisco IOS XR software prompts you to specify the name of the directory to be deleted.
Page 246 Related Commands Command Description delete Deletes a file from a flash memory device. Displays the contents of a file system. mkdir Creates a new directory on a flash file system. Cisco ASR 14000 Series Router System Management Command Reference SMR-244 OL-17231-01...
Page 247 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 248 Amount of memory in the file system (in bytes). Free(b) Amount of free memory in the file system (in bytes). Type Type of file system. Flags Permissions for file system. Prefixes Alias for the file system. Cisco ASR 14000 Series Router System Management Command Reference SMR-246 OL-17231-01...
Page 249 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 250 Mirror Indicates if disk mirroring is enabled or not. Flags Where disk mirroring is enabled, indicates whether the partition has been repaired, formatted, or the driver has been restarted. Cisco ASR 14000 Series Router System Management Command Reference SMR-248 OL-17231-01...
Page 251 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description mirror Configures disk mirroring on a node. mirror pause Temporarily pauses disk mirroring on a node. Cisco ASR 14000 Series Router System Management Command Reference SMR-249 OL-17231-01...
Page 252 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 253 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Command Description Displays the contents of a file system. Displays the current setting of the cd command. Cisco ASR 14000 Series Router System Management Command Reference SMR-251 OL-17231-01...
Page 254 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Cisco ASR 14000 Series Router System Management Command Reference...
Page 255 Commands on Cisco IOS XR Software This module describes the commands used to manage the hardware redundancy, power, and administrative status of the nodes on a router running Cisco IOS XR software. Cisco ASR 14000 Series Router System Management Command Reference...
Page 256 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 257 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For more information about identifying and selecting a DSC on the Cisco ASR 14000 Series Router, refer to Cisco ASR 14000 Series Router Getting Started Guide.
Page 258 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software dsc serial C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 259 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. By default, environment monitoring related to temperature and voltage is enabled on a router running Cisco IOS XR software. If environmental monitoring is disabled, you are not alerted if the router overheats. Task ID...
Page 260 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 261 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 262 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 263 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Before reloading nodes on a Cisco ASR 14000 Series Router, we recommend using the cfs check...
Page 264 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 265 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software hw-module port C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 266 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 267 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software hw-module power C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 268 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. The hw-module reset auto command is used to reload Cisco IOS XR software on a specific node. The node reloads with the current running configuration and active software set for that node.
Page 269 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software hw-module reset auto C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 270 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. Nodes that are shut down still have power, but cannot load or operate Cisco IOS XR software. Route processors (RPs) cannot be administratively shut down.
Page 271 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software hw-module shutdown C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 272 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 hw-module subslot reload To reload Cisco IOS XR software on a specific subslot, use the hw-module subslot reload command in EXEC mode.
Page 273 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 274 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 275 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software redundancy switchover C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 276 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For more information about identifying and selecting a DSC on the Cisco ASR 14000 Series Router refer to Cisco ASR 14000 Getting Started Guide.
Page 277 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show dsc C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 278 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 279 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show environment C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 280 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show environment C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 29 describes the significant fields shown in the display.
Page 281 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 282 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show fpd package C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 ROMMONB swv1.43 asmp...
Page 283 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show fpd package C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 ROMMONB swv1.43 sp...
Page 284 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show fpd package C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 285 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 286 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module fpd C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 287 Specifies whether an FPD upgrade or downgrade is required. A downgrade will be required in rare cases when the version of the FPD image has a higher major revision than the version of the FPD image in the current Cisco IOS XR software package.
Page 288 Defaults No default behavior or values Command Modes EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-286 OL-17231-01...
Page 289 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot brief C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 290 Defaults No default behavior or values Command Modes EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-288 OL-17231-01...
Page 291 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot config C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 292 Defaults No default behavior or values Command Modes EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-290 OL-17231-01...
Page 293 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot counters C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 294 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot counters C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 295 Defaults No default behavior or values Command Modes EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-293 OL-17231-01...
Page 296 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot errors C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 297 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot errors C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 298 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 299 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot plim-subblock C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 300 Defaults No default behavior or values Command Modes EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-298 OL-17231-01...
Page 301 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot registers C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 302 Defaults No default behavior or values Command Modes EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-300 OL-17231-01...
Page 303 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show hw-module subslot status C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 304 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 show inventory To retrieve and display information about all the Cisco products that are installed in the router, use the show inventory command in EXEC or administration EXEC mode.
Page 305 Note itself. If any of the Cisco products do not have an assigned PID, then the output may display incorrect PIDs, and the version ID (VID) and serial number (SN) elements may be missing. For UDI compliance products, the PID, VID, and SN are stored in EEPROM and NVRAM. Use the show inventory command to display this information.
Page 306 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show inventory C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 38 describes the significant fields shown in the display.
Page 307 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 308 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show led C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 39 describes the significant fields shown in the display.
Page 309 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 310 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show operational C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 311 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 312 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show platform C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 313 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 314 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show redundancy C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 315 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show redundancy C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 316 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 317 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show screddrv C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 42 describes the significant fields shown in the display.
Page 318 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 319 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software show version C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 320 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 321 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software upgrade cpuctrlbits C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 cpuctrl version info: Squid FPGA v2.07 Fri Jan 23 16:21:01 2004 ykoren...
Page 322 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 323 Displays which FPD image package is needed for the router to properly support the modules for the running Cisco IOS XR software release. Also indicates all available FPD images that are available for a specific module. Cisco ASR 14000 Series Router System Management Command Reference...
Page 324 Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software upgrade hw-module fpd C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 325 Manageability Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR software commands used to enable the HTTP server, enable router management through Extensible Markup Language (XML) agent services, and support the Common Object Request Broker Architecture (CORBA) infrastructure.
Page 326 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Command Modes Global configuration Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 327 RP/0/RP0/CPU0:router# show ipv4 access-lists test ipv4 access-list test 10 deny ip host 171.71.163.96 any 20 permit ip host 64.102.48.34 any Related Commands Command Description xml agent corba Enables XML CORBA agent services. Cisco ASR 14000 Series Router System Management Command Reference SMR-325 OL-17231-01...
Page 328 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 329 Checks host reachability and network connectivity on IP networks. xml agent corba hostname Enables the use of a static hostname for XML CORBA agent services. xml agent tty Enables XML requests over Secure Shell (SSH) and Telnet. Cisco ASR 14000 Series Router System Management Command Reference SMR-327 OL-17231-01...
Page 330 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 331 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 332 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Cisco ASR 14000 Series Router System Management Command Reference...
Page 333 Software Package Management Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR commands used to add packages to a router storage device, activate or deactivate packages, upgrade or downgrade existing packages, and display information about packages.
Page 334 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 335 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description install boot-options Sets boot options. show install boot-options Displays boot options. Cisco ASR 14000 Series Router System Management Command Reference SMR-333 OL-17231-01...
Page 336 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 337 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 338 Install operation 6 completed successfully at 13:35:50 UTC Sat Aug 26 2006. Related Commands Command Description clear install rollback Deletes saved installation points from the installation buffer. oldest show install log Displays the entries stored in the logging installation buffer. Cisco ASR 14000 Series Router System Management Command Reference SMR-336 OL-17231-01...
Page 339 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 340 Rolls back the software set to a saved installation point or to the last committed installation point. show install log Displays the entries stored in the logging installation buffer. show install rollback Displays the software set associated with a saved installation point. Cisco ASR 14000 Series Router System Management Command Reference SMR-338 OL-17231-01...
Page 341 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 342 Adds the contents of a PIE file to a storage device. install activate Adds a software package or SMU to the active software set. install deactivate Removes a package from the active software set. Cisco ASR 14000 Series Router System Management Command Reference SMR-340 OL-17231-01...
Page 343 (Optional. Administration EXEC mode only) Activates a package for a specific secure domain router (SDR). The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. Cisco ASR 14000 Series Router System Management Command Reference...
Page 344 The package is activated on all supported nodes for the SDR. • The operation is performed in asynchronous mode: The install activate command runs in the • background, and the EXEC prompt is returned as soon as possible. Cisco ASR 14000 Series Router System Management Command Reference SMR-342 OL-17231-01...
Page 345 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 346 This impacts routing and forwarding, but it ensures that the installation is performed without other issues. Cisco ASR 14000 Series Router System Management Command Reference SMR-344 OL-17231-01...
Page 347 RP/0/RP0/CPU0:router(admin)# install commit Install operation 16 'install commit' started by user 'user_b' at 19:18:58 UTC Sat Apr 08 2006. Install operation 16 completed successfully at 19:19:01 UTC Sat Apr 08 2006. Cisco ASR 14000 Series Router System Management Command Reference SMR-345 OL-17231-01...
Page 348 CLI at 04:30:01 PST Fri Dec 28 2007. Info: This operation will activate the following packages: Info: disk0:asr14k-rout-3.7.1 Info: disk0:asr14k-lc-3.7.1 Info: disk0:asr14k-fwdg-3.7.1 Info: disk0:asr14k-admin-3.7.1 Info: disk0:asr14k-base-3.7.1 Info: disk0:asr14k-os-mbi-3.7.1 Info: disk0:asr14k-fpd-3.7.1 Info: disk0:asr14k-diags-3.7.1 Info: disk0:asr14k-mgbl-3.7.1 Cisco ASR 14000 Series Router System Management Command Reference SMR-346 OL-17231-01...
Page 349 Displays active software packages. show install log Displays the entries stored in the logging installation buffer. show install request Displays the list of incomplete installation manager requests. Cisco ASR 14000 Series Router System Management Command Reference SMR-347 OL-17231-01...
Page 350 SDRs auto-abort-timer time (Optional) Specifies an abort timer value, time, in minutes, which when expired loads the last committed loadpath. Cisco ASR 14000 Series Router System Management Command Reference SMR-348 OL-17231-01...
Page 351 OWNER (Optional. Administration EXEC mode only.) Activates a package for a specific secure domain router (SDR). The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. Defaults Packages are added to the storage device, but are not activated.
Page 352 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 In the Cisco ASR 14000 Series Router router, the package files are also added to any additional installed Note distributed router processors (DRPs) on the router.
Page 353 This impacts routing and forwarding, but it ensures that the installation is performed without other issues. Task ID Task ID Operations pkg-mgmt execute Cisco ASR 14000 Series Router System Management Command Reference SMR-351 OL-17231-01...
Page 354 Makes the current active software set persistent across RP reloads. show install log Displays the entries stored in the logging installation buffer. show install request Displays the list of incomplete installation manager requests. Cisco ASR 14000 Series Router System Management Command Reference SMR-352 OL-17231-01...
Page 355 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 356 Adds a software package or SMU to the active software set. install add Adds the contents of a PIE file to a storage device. install deactivate Removes a package from the active software set. Cisco ASR 14000 Series Router System Management Command Reference SMR-354 OL-17231-01...
Page 357 OWNER (Optional. Administration EXEC mode only) Deactivates the auto-abort-timer for a specific secure domain router (SDR). The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. Defaults When activated, the auto-abort-timer runs to expiration and then loads the last committed loadpath.
Page 358 Adds a software package or SMU to the active software set. install commit Makes the current active software set persistent across RP reloads. install deactivate Removes a package from the active software set. Cisco ASR 14000 Series Router System Management Command Reference SMR-356 OL-17231-01...
Page 359 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 360 Performs a reload of a single node or all nodes in the system. reload (administration Performs a reload of a single node or all nodes in the system. EXEC) show install boot-options Displays boot options. Cisco ASR 14000 Series Router System Management Command Reference SMR-358 OL-17231-01...
Page 361 OWNER (Optional. Administration EXEC mode only) Commits the active software set for a specific SDR. The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. Defaults Administration EXEC Mode Commits the active software set for all SDRs.
Page 362 Install operation 16 completed successfully at 19:19:01 UTC Sat Apr 08 2006. Related Commands Command Description show install committed Displays committed active packages. show install log Displays the entries stored in the logging installation buffer. Cisco ASR 14000 Series Router System Management Command Reference SMR-360 OL-17231-01...
Page 363 OWNER (Optional. Administration EXEC mode only) Deactivates a package for a specific secure domain router (SDR).The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. location node-id (Optional) Deactivates a package from the designated node. The node-id argument is entered in rack/slot/module notation.
Page 364 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 365 The following example shows how to deactivate a package on all supported nodes in all SDRs. The operation is performed in synchronous mode. RP/0/RP0/CPU0:router(admin)# install deactivate disk0:asr14k-mpls-3.7.1 synchronous Cisco ASR 14000 Series Router System Management Command Reference SMR-363 OL-17231-01...
Page 366 - check the installation instructions. Error: - activate or deactivate the specified packages on the specified Error: nodes. Install operation 25 failed at 23:01:44 UTC Sat Apr 15 2006. Cisco ASR 14000 Series Router System Management Command Reference SMR-364 OL-17231-01...
Page 367 Displays inactive packages in the active software set. show install log Displays the entries stored in the logging installation buffer. show install request Displays the list of incomplete installation manager requests. Cisco ASR 14000 Series Router System Management Command Reference SMR-365 OL-17231-01...
Page 368 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 369 Install operation 5 'install label 0 label-name brians_smu' started by user 'user' on SDR Owner via CLI at 09:26:43 DST Thu Aug 09 2007. Install operation 5 completed successfully at 09:26:44 DST Thu Aug 09 2007. Cisco ASR 14000 Series Router System Management Command Reference SMR-367 OL-17231-01...
Page 370 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description install activate Adds a software package or SMU to the active software set. Cisco ASR 14000 Series Router System Management Command Reference SMR-368 OL-17231-01...
Page 371 OWNER (Optional. Administration EXEC mode only) Removes a package for a specific secure domain router (SDR). The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. prompt-level {default | (Optional) Specifies when you are prompted for input during the none} procedure.
Page 372 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 373 Displays the entries stored in the logging installation buffer. show install inactive Displays the inactive packages for one or more SDRs. show install request Displays the list of incomplete installation manager requests. Cisco ASR 14000 Series Router System Management Command Reference SMR-371 OL-17231-01...
Page 374 Installation point ID number. label Label associated with an installation point. committed Rolls the Cisco IOS XR software back to the last committed installation point. auto-abort-timer time (Optional) Specifies an abort timer value, time, in minutes, which when expired loads the last committed loadpath.
Page 375 When an installation point is created, the Cisco IOS XR software assigns an ID number to that rollback point. To roll back to a saved installation point, enter the installation point ID number assigned to it for the point-id argument. When a software...
Page 376 Displays the entries stored in the logging installation buffer. show install request Displays the list of incomplete installation manager requests. show install rollback Displays the software set associated with a saved installation point. Cisco ASR 14000 Series Router System Management Command Reference SMR-374 OL-17231-01...
Page 377 (Optional. Administration EXEC mode only.) Performs the command for a specific secure domain router (SDR). The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. location node-id (Optional) Verifies the consistency of previously installed software from the designated node with the package file from which it originated.
Page 378 [SUCCESS] Health-check Successful. Info: dll [SUCCESS] Health-check Successful. Info: Health Check Summary: Info: 0/0/CPU0: ERROR. Info: 0/3/CPU0: ERROR. Info: 0/RP0/CPU0: SUCCESSFUL. Info: The processes can be repaired. Info: Repair begins Cisco ASR 14000 Series Router System Management Command Reference SMR-376 OL-17231-01...
Page 379 Repair ends.. Related Commands Command Description show install log Displays the entries stored in the logging installation buffer. show install request Displays the list of incomplete installation manager requests. Cisco ASR 14000 Series Router System Management Command Reference SMR-377 OL-17231-01...
Page 380 (Optional. Administration EXEC mode only.) Displays the active packages for a specific secure domain router (SDR). The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. location node-id (Optional) Displays the active packages for a designated node. The node-id argument is expressed in rack/slot/module notation.
Page 381 Use the summary keyword to display a summary of the active packages in the system. This command also shows the default software profile used for new SDRs. RP/0/RP0/CPU0:router# show install summary Cisco ASR 14000 Series Router System Management Command Reference SMR-379 OL-17231-01...
Page 382 Displays information about a package. show install pie-info Displays information about the packages contained in a PIE file. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-380 OL-17231-01...
Page 383 (Optional. Administration EXEC mode only.) Displays the active packages for a specific secure domain router (SDR). The only SDR available is OWNER, which refers to the entire Cisco ASR 14000 Series Router router. location node-id (Optional) Displays the active packages for a designated node. The node-id argument is expressed in rack/slot/module notation.
Page 384 The following is sample output from the show install active command for a specific SDR: RP/0/RP0/CPU0:router(admin)#show install active SDR Owner Secure Domain Router: Owner Node 0/0/CPU0 [LC] [SDR: Owner] Boot Device: mem: Cisco ASR 14000 Series Router System Management Command Reference SMR-382 OL-17231-01...
Page 385 Boot Image: /disk0/asr14k-os-mbi-3.7.1.11I/mbiasr14k-rp.vm Active Packages: disk0:asr14k-diags-3.7.1.11I disk0:asr14k-mgbl-3.7.1.11I disk0:asr14k-mcast-3.7.1.11I disk0:asr14k-mpls-3.7.1.11I disk0:asr14k-k9sec-3.7.1.11I disk0:comp-asr14k-mini-3.7.1.11I Node 0/RP1/CPU0 [RP] [SDR: Owner] Boot Device: disk0: Boot Image: /disk0/asr14k-os-mbi-3.7.1.11I/mbiasr14k-rp.vm Active Packages: disk0:asr14k-diags-3.7.1.11I disk0:asr14k-mgbl-3.7.1.11I disk0:asr14k-mcast-3.7.1.11I disk0:asr14k-mpls-3.7.1.11I disk0:asr14k-k9sec-3.7.1.11I disk0:comp-asr14k-mini-3.7.1.11I Cisco ASR 14000 Series Router System Management Command Reference SMR-383 OL-17231-01...
Page 386 Displays information about a package. show install pie-info Displays information about the packages contained in a PIE file. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-384 OL-17231-01...
Page 387 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 388 The following additional messages indicate the type discrepancy found in the audit: A package specified in the audit file is not present at all. In other words, there was no install – add performed for this package. Cisco ASR 14000 Series Router System Management Command Reference SMR-386 OL-17231-01...
Page 389 Displays information about a package. show install pie-info Displays information about the packages contained in a PIE file. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-387 OL-17231-01...
Page 390 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 391 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 392 0/SM2/SP no boot options set. 0/SM3/SP no boot options set. Related Commands Command Description clear install boot-options Clears boot options. install boot-options Sets boot options. Cisco ASR 14000 Series Router System Management Command Reference SMR-390 OL-17231-01...
Page 393 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 394 SDR or system: RP/0/RP0/CPU0:router# show install committed Secure Domain Router: Owner Node 0/1/SP [SP] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Committed Packages: disk0:asr14k-diags-3.7.1 disk0:comp-asr14k-mini-3.7.1 Node 0/1/CPU0 [LC] [SDR: Owner] Cisco ASR 14000 Series Router System Management Command Reference SMR-392 OL-17231-01...
Page 395 Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Committed Packages: disk0:asr14k-diags-3.7.1 disk0:comp-asr14k-mini-3.7.1 Node 0/SM3/SP [SP] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Committed Packages: disk0:asr14k-diags-3.7.1 disk0:comp-asr14k-mini-3.7.1 Table 46 describes the significant fields shown in the display. Cisco ASR 14000 Series Router System Management Command Reference SMR-393 OL-17231-01...
Page 396 Displays information about a package. show install pie-info Displays information about the packages contained in a PIE file. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-394 OL-17231-01...
Page 397 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 398 The following is sample output from the show install inactive command with the detail keyword: RP/0/RP0/CPU0:router(admin)# show install inactive detail Secure Domain Router: Owner Node 0/0/CPU0 [RP] [SDR: Owner] Inactive Packages: disk0:asr14k-compmgmt__installmgr-0.0.5 Cisco ASR 14000 Series Router System Management Command Reference SMR-396 OL-17231-01...
Page 399 Displays information about a package. show install pie-info Displays information about the packages contained in a PIE file. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-397 OL-17231-01...
Page 400 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 401 RP/0/RP0/CPU0:router(admin)# show install log 2 detail Install operation 3 started by user 'user_b' at 20:49:34 UTC Mon Aug 28 2006. (admin) install activate disk0:asr14k-k9sec-3.7.1 disk0:asr14k-mcast-3.7.1 disk0:asr14k-mgbl-3.7.1 disk0:asr14k-mpls-3.7.1 disk0:asr14k-pagent-3.7.1 disk0:asr14k-doc-3.7.1 disk0:asr14k-diags-3.7.1 Cisco ASR 14000 Series Router System Management Command Reference SMR-399 OL-17231-01...
Page 402 Install operation 3 started by user 'user_b' at 20:49:34 UTC Mon Aug 28 2006. (admin) install activate disk0:asr14k-k9sec-3.7.1 disk0:asr14k-mcast-3.7.1 disk0:asr14k-mgbl-3.7.1 disk0:asr14k-mpls-3.7.1 disk0:asr14k-pagent-3.7.1 disk0:asr14k-doc-3.7.1 disk0:asr14k-diags-3.7.1 Install operation 3 completed successfully at 20:52:42 UTC Mon Aug 28 2006. Summary: Cisco ASR 14000 Series Router System Management Command Reference SMR-400 OL-17231-01...
Page 403 Adding file: online_diag_asr14k_sp.startup Replacing file: package_compatibility Replacing file: md5_manifest Installation changes on nodes 0/1/CPU0, 0/6/CPU0: Adding executable: ipv4_mfwd_ha_timer_handler Adding and starting process: ipv4_mfwd_partner Adding executable: ipv6_mfwd_ha_timer_handler Adding and starting process: ipv6_mfwd_partner Cisco ASR 14000 Series Router System Management Command Reference SMR-401 OL-17231-01...
Page 404: Table Of Contents
Deletes inactive packages from a storage device. install rollback to Rolls back the software set to a saved installation point or to the last committed installation point. Cisco ASR 14000 Series Router System Management Command Reference SMR-402 OL-17231-01...
Page 405 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 406 Components in package disk0:asr14k-mgbl-3.7.1, package asr14k-mgbl: emweb V[r37x/1] Agranat/Virata Emweb embedded web server ipsla V[r37x/1] IP SLA Agent (formerly known as Service Assurance Agen) orb-taoorb V[r37x/1] TAO/ACE ORB to support various CORBA services. Cisco ASR 14000 Series Router System Management Command Reference SMR-404 OL-17231-01...
Page 407: Show Install Log
Displays the entries stored in the logging installation buffer. show install pie-info Displays information about the packages contained in a PIE file. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-405 OL-17231-01...
Page 408 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 409 Vendor : Cisco Systems Desc : Manageability Package Build : Built on Wed May 10 08:04:58 UTC 2006 Source : By edde-bld1 in /vws/aga/production/3.7.1/asr14k/workspace for c28 Card(s): RP, DRP, DRPSC Cisco ASR 14000 Series Router System Management Command Reference SMR-407 OL-17231-01...
Page 410 V[r37x/1] Generic XML Agent cfg_emorb_xmlagent.parser sh_xmlagent_ns_cfg__api.configinfo xmlagent xmlagent.startup ipsla V[r37x/1] IP SLA Agent (formerly known as Service Assurance ) cfg_ipsla.parser debug_ipsla.parser ipsla_app_common_cfg.schema ipsla_app_common_oper.schema ipsla_ma ipsla_ma.startup Cisco ASR 14000 Series Router System Management Command Reference SMR-408 OL-17231-01...
Page 411 V[r37x/1] Performance Management Component for y cfg_perfmgmt.parser libperfmgmtbagdesc.dll libpm_error.dll manageability_perf_cfg_common.schema manageability_perf_enable_monitor_cfg.schema manageability_perf_enable_stats_cfg.schema manageability_perf_enable_thresh_cfg.schema manageability_perf_oper.schema Cisco ASR 14000 Series Router System Management Command Reference SMR-409 OL-17231-01...
Page 412 XML Telnet/SSH agent libxmlttycmn.dll libxmlttyerror.dll xml_tty_agent xml_tty_agent.startup xml_tty_agent_cfg.parser xml_tty_client xml_tty_client_exec.parser xml_tty_cmn_debug.parser cfg-sh-mgbl V[r37x/1] LR shared plane manageability config sh_mgbl_ns_cfg__api.partitioninfo orb-taoorb V[r37x/1] TAO/ACE ORB to support various CORBA services. cfg_emorb_cmds.parser libtaoorb_error.dll libtaoorbutils.dll Cisco ASR 14000 Series Router System Management Command Reference SMR-410 OL-17231-01...
Page 413 FTP Client Management Information Base) ftpclient.mib ftpclientmib_cmds.parser libftpclientmib.dll snmp-pingmib V[r37x/1] Ping Management Information Base (MIB) libpingmib.dll ping.mib pingmib.startup pingmib_cmds.parser snmppingd snmp-sensormib V[r37x/1] Sensor Management Information Base (MIB) ciscosensor.mib ciscosensormib_cmds.parser libciscosensormib.dll sh_ciscosensormib_ns_cfg__api.configinfo Cisco ASR 14000 Series Router System Management Command Reference SMR-411 OL-17231-01...
Page 414 Displays information about a package. show install request Displays the list of incomplete installation manager requests. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-412 OL-17231-01...
Page 415: Command
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. Cisco IOS XR software processes only one installation request per SDR at a time. The show install request command displays any incomplete request that is currently running.
Page 416: Install Activate
Deletes inactive packages from a storage device. install rollback to Rolls back the software set to a saved installation point or to the last committed installation point. Cisco ASR 14000 Series Router System Management Command Reference SMR-414 OL-17231-01...
Page 417 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 418 Node 0/1/SP [SP] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Rollback Packages: disk0:comp-asr14k-mini-3.7.1 Node 0/1/CPU0 [LC] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/lc/mbiasr14k-lc.vm Rollback Packages: disk0:comp-asr14k-mini-3.7.1 Node 0/6/SP [SP] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Rollback Packages: Cisco ASR 14000 Series Router System Management Command Reference SMR-416 OL-17231-01...
Page 419 Rollback Packages: disk0:comp-asr14k-mini-3.7.1 disk0:asr14k-admin-3.7.1 disk0:asr14k-base-3.7.1 disk0:asr14k-os-mbi-3.7.1 Node 0/1/CPU0 [LC] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/lc/mbiasr14k-lc.vm Rollback Packages: disk0:comp-asr14k-mini-3.7.1 disk0:asr14k-lc-3.7.1 disk0:asr14k-fwdg-3.7.1 disk0:asr14k-admin-3.7.1 disk0:asr14k-base-3.7.1 disk0:asr14k-os-mbi-3.7.1 Node 0/6/SP [SP] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Cisco ASR 14000 Series Router System Management Command Reference SMR-417 OL-17231-01...
Page 420 Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Rollback Packages: disk0:comp-asr14k-mini-3.7.1 disk0:asr14k-admin-3.7.1 disk0:asr14k-base-3.7.1 disk0:asr14k-os-mbi-3.7.1 Node 0/SM2/SP [SP] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Rollback Packages: disk0:comp-asr14k-mini-3.7.1 disk0:asr14k-admin-3.7.1 disk0:asr14k-base-3.7.1 disk0:asr14k-os-mbi-3.7.1 Node 0/SM3/SP [SP] [SDR: Owner] Boot Image: /disk0/asr14k-os-mbi-3.7.1/sp/mbiasr14k-sp.vm Cisco ASR 14000 Series Router System Management Command Reference SMR-418 OL-17231-01...
Page 421: Install Rollback To
Deletes saved installation points from the installation buffer. oldest install rollback to Rolls back the software set to a saved installation point or to the last committed installation point. Cisco ASR 14000 Series Router System Management Command Reference SMR-419 OL-17231-01...
Page 422 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 423 RP/0/RP0/CPU0:router(admin)# show install which file cdp File cdp not active on node 0/1/SP Node 0/1/CPU0 has file cdp for boot package /disk0/asr14k-os-mbi-3.7.1.5I/lc/mbihfe Package: Cisco ASR 14000 Series Router System Management Command Reference SMR-421 OL-17231-01...
Page 424 Source : By edde-bld1 in /vws/aga/production/3.7.1.5I.SIT-image/asr14k/wor8 Card(s): RP, DRP, DRPSC, OC3-POS-4, OC12-POS, GE-3, OC12-POS-4, OC48-POC Restart information: Default: parallel impacted processes restart Component: cdp V[ci-34/6] Cisco Discovery Protocol (CDP) File: Cisco ASR 14000 Series Router System Management Command Reference SMR-422 OL-17231-01...
Page 425 Name of the of the process or DLL file that information is being specified for. Card(s) Supported card types on which the file can be used. Local view Generic directory path used to access the file on the nodes where it is used. Cisco ASR 14000 Series Router System Management Command Reference SMR-423 OL-17231-01...
Page 426 Displays information about a package. show install request Displays the list of incomplete installation manager requests. show install which Displays the origin of a component, package, or file. Cisco ASR 14000 Series Router System Management Command Reference SMR-424 OL-17231-01...
Page 427 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 NTP Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR Network Time Protocol (NTP) commands used to perform basic network time management tasks, including synchronizing time settings and coordinating time distribution over the network.
Page 428 Allows only NTP control queries. The Cisco IOS XR software uses NTP Version 4, but the RFC for Version 3 (RFC 1305: Network Time Protocol (Version 3) — Specification, Implementation and Analysis) still applies.
Page 429 RP/0/RP0/CPU0:router(config-ntp)# access-group peer access1 RP/0/RP0/CPU0:router(config-ntp)# access-group serve-only access2 Related Commands Command Description ipv4 access-list Defines an IPv4 access list by name. Cisco ASR 14000 Series Router System Management Command Reference SMR-427 OL-17231-01...
Page 430 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 431 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 432 Configures the system clock to synchronize a peer or to be synchronized by a peer. server (NTP) Allows the system clock to be synchronized by a time server. trusted-key Designates the key or keys to be trusted. Cisco ASR 14000 Series Router System Management Command Reference SMR-430 OL-17231-01...
Page 433 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 434 Description broadcast client Allows a networking device to receive NTP broadcast packets on an interface. broadcastdelay Sets the estimated round-trip delay between the software and an NTP broadcast server. Cisco ASR 14000 Series Router System Management Command Reference SMR-432 OL-17231-01...
Page 435 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 436 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 437 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 438 The networking device is normally synchronized, directly or indirectly, with an external system that has a clock. The Cisco IOS XR software does not support directly attached radio or atomic clocks. The master command should be used only when there is a temporary disruption in a reliable time service. It should not be employed as an alternative source by itself in the absence of a real-time service.
Page 439 Examples The following example shows how to configure a networking device as an NTP master clock to which peers may synchronize: RP/0/RP0/CPU0:router(config)# ntp RP/0/RP0/CPU0:router(config-ntp)# master 9 Cisco ASR 14000 Series Router System Management Command Reference SMR-437 OL-17231-01...
Page 440 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 441 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 442 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Task ID Task ID Operations ip-services read, write Examples The following example shows how to enter NTP configuration mode: RP/0/RP0/CPU0:router(config)# ntp RP/0/RP0/CPU0:router(config-ntp)# Cisco ASR 14000 Series Router System Management Command Reference SMR-440 OL-17231-01...
Page 443 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 444 No peers are configured by default. If a peer is configured, the default NTP version number is 4, no authentication key is used, and the source IP address is taken from the outgoing interface. minpoll interval: 6 seconds maxpoll interval: 10 seconds Command Modes NTP configuration Cisco ASR 14000 Series Router System Management Command Reference SMR-442 OL-17231-01...
Page 445 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 446 6 seconds maxpoll interval: 10 seconds Command Modes NTP configuration Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-444 OL-17231-01...
Page 447 Defines an authentication key for NTP. (NTP) peer (NTP) Configures the system clock to synchronize a peer or to be synchronized by a peer. source (NTP) Uses a particular source address in NTP packets. Cisco ASR 14000 Series Router System Management Command Reference SMR-445 OL-17231-01...
Page 448 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 449 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 450 Address of machine to which the peer is synchronized. time Last time stamp that the peer received from its master. our mode Mode relative to peer (active/passive/client/server/bdcast/bdcast client). peer mode Mode of peer relative. Cisco ASR 14000 Series Router System Management Command Reference SMR-448 OL-17231-01...
Page 451 Round-trip delay in milliseconds of each sample. filtoffset Clock offset in milliseconds of each sample. filterror Approximate error of each sample. Related Commands Command Description show ntp status Displays the status of NTP. Cisco ASR 14000 Series Router System Management Command Reference SMR-449 OL-17231-01...
Page 452 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 453 Total delay (in milliseconds) along path to root clock. root dispersion Dispersion of root path. peer dispersion Dispersion of synchronized peer. Related Commands Command Description show ntp associations Displays the status of NTP associations. Cisco ASR 14000 Series Router System Management Command Reference SMR-451 OL-17231-01...
Page 454 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 455 (NTP) Configures the system clock to synchronize a peer or to be synchronized by a peer. server (NTP) Allows the system clock to be synchronized by a time server. Cisco ASR 14000 Series Router System Management Command Reference SMR-453 OL-17231-01...
Page 456 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 457 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description authenticate (NTP) Enables NTP authentication. authentication-key Defines an authentication key for NTP. (NTP) Cisco ASR 14000 Series Router System Management Command Reference SMR-455 OL-17231-01...
Page 458 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 459 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description clock read-calendar Copies the hardware (calendar) clock settings into the software clock. clock update-calendar Sets the calendar from the software clock. Cisco ASR 14000 Series Router System Management Command Reference SMR-457 OL-17231-01...
Page 460 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Cisco ASR 14000 Series Router System Management Command Reference...
Page 461 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Object Tracking Commands in Cisco IOS XR Software This chapter describes the Cisco IOS XR software commands used to track objects. Cisco ASR 14000 Series Router System Management Command Reference SMR-459...
Page 462 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 463 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 464 Initiates or identifies a tracking process to track the status of an object; also enters track configuration mode. type line-protocol state Configures tracking based on the line protocol state of an interface object. Cisco ASR 14000 Series Router System Management Command Reference SMR-462 OL-17231-01...
Page 465 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 466 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 467 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 468 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 469 Initiates or identifies a tracking process to track the status of an object; also enters track configuration mode. type list boolean Configures tracking of a list of objects based on a Boolean calculation. Cisco ASR 14000 Series Router System Management Command Reference SMR-467 OL-17231-01...
Page 470 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 471 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 472 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 473 Clears entry of a delay, in seconds, before the track or interface state should be polled for a change in status. track Initiates or identifies a tracking process to track the status of an object; also enters track configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-471 OL-17231-01...
Page 474 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. To access this interface command, you must be in line protocol tracking configuration submode. For information about interface keywords, see Cisco IOS XR Interface and Hardware Component Command Reference. Task ID...
Page 475 Configures tracking of a list of objects based on a Boolean calculation. type route reachability Configures tracking based on whether or not a route is part of a particular routing table. Cisco ASR 14000 Series Router System Management Command Reference SMR-473 OL-17231-01...
Page 476 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 477 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 478 Initiates or identifies a tracking process to track the status of an object; also enters track configuration mode. type list boolean Configures tracking of a list of objects based on a Boolean calculation. Cisco ASR 14000 Series Router System Management Command Reference SMR-476 OL-17231-01...
Page 479 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 480 Configures tracking based on whether or not a route is part of a particular routing table. vrf (track) Configures that a VRF table should be used as the basis to track route reachability. Cisco ASR 14000 Series Router System Management Command Reference SMR-478 OL-17231-01...
Page 481 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 482 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description track Initiates or identifies a tracking process to track the status of an object; also enters track configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-480 OL-17231-01...
Page 483 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 484 Configures tracking based on whether or not a route is part of a particular routing table. type route reachability Configures tracking based on whether or not a route is part of a particular routing table. Cisco ASR 14000 Series Router System Management Command Reference SMR-482 OL-17231-01...
Page 485 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 486 Description show track Displays information about objects that were tracked. track Initiates or identifies a tracking process to track the status of an object; also enters global configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-484 OL-17231-01...
Page 487 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 488 Configures tracking based on the line protocol state of an interface object. type route reachability Configures tracking based on whether or not a route is part of a particular routing table. Cisco ASR 14000 Series Router System Management Command Reference SMR-486 OL-17231-01...
Page 489 Modification Command History Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 490 Displays information about objects that were tracked. track Initiates or identifies a tracking process to track the status of an object; also enters global configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-488 OL-17231-01...
Page 491 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 492 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Cisco ASR 14000 Series Router System Management Command Reference...
Page 493 Process and Memory Management Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR software commands used to manage processes and memory. For more information about using the process and memory management commands to perform troubleshooting tasks, see Cisco ASR 14000 Series Router Getting Started Guide.
Page 494 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 495 Process and Memory Management Commands on Cisco IOS XR Software affinity location-set C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 496 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 497 Process and Memory Management Commands on Cisco IOS XR Software affinity location-type C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 You can configure the placement policy to allow certain processes to stay where they are (current) or move just by indicating so through the various affinity choices.
Page 498 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 499 Process and Memory Management Commands on Cisco IOS XR Software affinity program C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 500 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 501 Process and Memory Management Commands on Cisco IOS XR Software affinity self C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 502 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 503 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. When a process crashes on the Cisco IOS XR software, a core dump file of the event is written to a designated destination without bringing down the router. Upon receiving notification that a process has terminated abnormally, the Cisco IOS XR software then respawns the crashed process.
Page 504 Process and Memory Management Commands on Cisco IOS XR Software dumpcore C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Process status information •...
Page 505 Process and Memory Management Commands on Cisco IOS XR Software dumpcore C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 RP/0/RP0/CPU0Sep 22 01:40:27.005 : dumper[54]: %DUMPER-7-DLL_INFO :...
Page 506 After the higher limit value has been reached, the Cisco IOS XR software begins to recycle the values appended to core dump files, beginning with the lower limit value.
Page 507 We recommend that you specify a location on the hard disk as the primary location. Note In addition to the three preferred destinations that can be configured, Cisco IOS XR software provides three default fallback destinations for core dump files in the event that user-defined locations are unavailable.
Page 508 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 The Cisco IOS XR software does not save a core file on a local storage device if the size of the core dump Note file creates a low-memory condition.
Page 509 Process and Memory Management Commands on Cisco IOS XR Software exception filepath C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 510 IDs. Use the exception pakmem on command to configure the collection of packet memory information in core dump files. Cisco Technical Support Center engineers and development engineers use packet memory information to debug packet memory issues related to a process.
Page 511 Process and Memory Management Commands on Cisco IOS XR Software exception pakmem C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 512 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 513 Process and Memory Management Commands on Cisco IOS XR Software exception sparse C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 514 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 515 This command uses the default scheduling priority from where the command is being run. Command Modes EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-513 OL-17231-01...
Page 516 Process and Memory Management Commands on Cisco IOS XR Software follow C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 517 Process and Memory Management Commands on Cisco IOS XR Software follow C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 518 Process and Memory Management Commands on Cisco IOS XR Software follow C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 /pkg/lib/libplatform.dll 0xfc0d6000 0x0000aa88 0xfc0e1000 0x00002000...
Page 519 Process and Memory Management Commands on Cisco IOS XR Software follow C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 520 Process and Memory Management Commands on Cisco IOS XR Software follow C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 521 Process and Memory Management Commands on Cisco IOS XR Software follow C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Current process = "pkg/bin/lpts_pa", PID = 57433 TID = 3...
Page 522 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 523 Process and Memory Management Commands on Cisco IOS XR Software monitor processes C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 524 Process and Memory Management Commands on Cisco IOS XR Software monitor processes C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 525 Process and Memory Management Commands on Cisco IOS XR Software monitor processes C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 526 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 527 Process and Memory Management Commands on Cisco IOS XR Software monitor threads C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 528 Process and Memory Management Commands on Cisco IOS XR Software monitor threads C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 59 describes the significant fields shown in the display.
Page 529 Process and Memory Management Commands on Cisco IOS XR Software monitor threads C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 530 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 531 Process and Memory Management Commands on Cisco IOS XR Software placement memory C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 532 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 533 Process and Memory Management Commands on Cisco IOS XR Software placement program C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 534 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 535 Process and Memory Management Commands on Cisco IOS XR Software placement reoptimize C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 RP/0/RP0/CPU0:Nov 12 1:1:1.1 : placed[170]: %PLACED_PLACE-6-...
Page 536 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 537 If multiple copies are on the system, all instances of the process are started simultaneously. process blocked This command is used by Cisco Technical Support engineers to collect debug information about a process. If the process mandatory command is set for a process, the process blocked command also causes the node to restart.
Page 538 Process and Memory Management Commands on Cisco IOS XR Software process C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 539 By default, processes are configured to dump shared memory, text area, stack, data section, and heap information. Command Modes Administration EXEC EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-537 OL-17231-01...
Page 540 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. The modular architecture of the Cisco IOS XR software allows core dumps for individual processes. By default, processes are configured to dump shared memory, text area, stack, data section, and heap information.
Page 541 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 542 Process and Memory Management Commands on Cisco IOS XR Software process mandatory C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 If a process unexpectedly goes down, the following action occurs based on whether the process is considered “mandatory.”...
Page 543 Use the show context command to display core dump context information. This command displays context information for the last ten core dumps. Cisco Technical Support Center engineers and development engineers use this command for post-analysis in the debugging of processes.
Page 544 Process and Memory Management Commands on Cisco IOS XR Software show context C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 545 Process and Memory Management Commands on Cisco IOS XR Software show context C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 546 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 547 Process and Memory Management Commands on Cisco IOS XR Software show dll C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 548 Process and Memory Management Commands on Cisco IOS XR Software show dll C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 549 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 550 Process and Memory Management Commands on Cisco IOS XR Software show exception C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 551 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 552 Process and Memory Management Commands on Cisco IOS XR Software show memory C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 553 Process and Memory Management Commands on Cisco IOS XR Software show memory C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Shared window qad: 39.621K...
Page 554 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 555 Process and Memory Management Commands on Cisco IOS XR Software show memory compare C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 556 Process and Memory Management Commands on Cisco IOS XR Software show memory compare C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 64 describes the significant fields shown in the display.
Page 557 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 558 Process and Memory Management Commands on Cisco IOS XR Software show memory heap C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 559 Process and Memory Management Commands on Cisco IOS XR Software show memory heap C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 560 Process and Memory Management Commands on Cisco IOS XR Software show memory heap C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 561 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 562 Process and Memory Management Commands on Cisco IOS XR Software show placement location C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 563 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 564 Process and Memory Management Commands on Cisco IOS XR Software show placement policy C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 565 Process and Memory Management Commands on Cisco IOS XR Software show placement policy C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 566 Process and Memory Management Commands on Cisco IOS XR Software show placement policy C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 567 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 568 Process and Memory Management Commands on Cisco IOS XR Software show placement program C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 569 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 570 Process and Memory Management Commands on Cisco IOS XR Software show placement reoptimize C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 571 Process and Memory Management Commands on Cisco IOS XR Software show processes C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 572 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 573 Process and Memory Management Commands on Cisco IOS XR Software show processes C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 71 describes the significant fields shown in the display.
Page 574 Process and Memory Management Commands on Cisco IOS XR Software show processes C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Table 72 describes the significant fields shown in the display.
Page 575 Process and Memory Management Commands on Cisco IOS XR Software show processes C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1...
Page 576 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 577 SNMP Server Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR software commands used to configure and monitor the Simple Network Management Protocol (SNMP) for network monitoring and management. Cisco ASR 14000 Series Router System Management Command Reference...
Page 578 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 579 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 580 Command Description snmp-server ifindex persist Enables ifIndex persistence globally for all SNMP interfaces. snmp-server interface Enables an interface to send SNMP trap notifications and enter SNMP interface configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-578 OL-17231-01...
Page 581 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 582 Command Description snmp-server ifindex persist Enables ifIndex persistence globally for all SNMP interfaces. snmp-server interface Enables an interface to send SNMP trap notifications and enter SNMP interface configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-580 OL-17231-01...
Page 583 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 584 Number of traps dropped. Traps are dropped when the trap queue for a destination exceeds the maximum length of the queue, as set by the snmp-server queue-length command. Cisco ASR 14000 Series Router System Management Command Reference SMR-582 OL-17231-01...
Page 585 Displays a list of the MIB objects registered on the system. snmp-server chassis-id Provides a message line identifying the SNMP server serial number. snmp-server queue-length Establishes the message queue length for each trap host. Cisco ASR 14000 Series Router System Management Command Reference SMR-583 OL-17231-01...
Page 586 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 587 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 588 Settings that are set in volatile or temporary memory on the device, or in nonvolatile or persistent memory where settings remain after the device is turned off and on again. Related Commands Command Description snmp-server group Configures an SNMP user group. Cisco ASR 14000 Series Router System Management Command Reference SMR-586 OL-17231-01...
Page 589 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 590 Version of SNMP used to send the trap, either v1, v2c, or v3. Related Commands Command Description snmp-server host Specifies the recipient of an SNMP notification operation. Cisco ASR 14000 Series Router System Management Command Reference SMR-588 OL-17231-01...
Page 591 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 592 Command Description snmp-server Enables ifIndex persistence globally on all SNMP interfaces,. ifindex persist snmp-server Enables an interface to send SNMP trap notifications and enter SNMP interface interface configuration mode. Cisco ASR 14000 Series Router System Management Command Reference SMR-590 OL-17231-01...
Page 593 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 594 The following is sample output from the show snmp mib detailed command: RP/0/RP0/CPU0:Router# show snmp mib detailed Entitymib:dll=/pkg/lib/mib/libEntitymib.dll, config=Entity.mib, loaded 1.3.6.1.2.1.47.1.1.1.1.2 1.3.6.1.2.1.47.1.1.1.1.3 1.3.6.1.2.1.47.1.1.1.1.4 1.3.6.1.2.1.47.1.1.1.1.5 1.3.6.1.2.1.47.1.1.1.1.6 1.3.6.1.2.1.47.1.1.1.1.7 1.3.6.1.2.1.47.1.1.1.1.8 1.3.6.1.2.1.47.1.1.1.1.9 1.3.6.1.2.1.47.1.1.1.1.10 1.3.6.1.2.1.47.1.1.1.1.11 1.3.6.1.2.1.47.1.1.1.1.12 1.3.6.1.2.1.47.1.1.1.1.13 1.3.6.1.2.1.47.1.1.1.1.14 1.3.6.1.2.1.47.1.1.1.1.15 1.3.6.1.2.1.47.1.1.1.1.16 1.3.6.1.2.1.47.1.2.1.1.2 1.3.6.1.2.1.47.1.2.1.1.3 Cisco ASR 14000 Series Router System Management Command Reference SMR-592 OL-17231-01...
Page 595 Related Commands Command Description show snmp Displays the status of SNMP communications. Cisco ASR 14000 Series Router System Management Command Reference SMR-593 OL-17231-01...
Page 596 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 597 Related Commands Command Description snmp-server group Configures an SNMP user group. snmp-server user Configures a new user to an SNMP group. Cisco ASR 14000 Series Router System Management Command Reference SMR-595 OL-17231-01...
Page 598 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 599 Unique identification string to identify the chassis serial number. Defaults On hardware platforms, where the serial number can be device read, the default is the serial number. For example, some Cisco devices have default chassis ID values of their serial numbers. Command Modes Global configuration...
Page 600 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 601 RP/0/RP0/CPU0:Router(config)# snmp-server community mgr view restricted rw The following example shows how to remove the community comaccess: RP/0/RP0/CPU0:Router(config)# no snmp-server community comaccess Related Commands Command Description snmp-server view Creates or updates a view entry. Cisco ASR 14000 Series Router System Management Command Reference SMR-599 OL-17231-01...
Page 602 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 603 The following example maps the community name “sample 2” to the SNMP context name “sample1:” RP/0/RP0/CPU0:Router(config)# snmp-server community-map sample2 context sample1 Related Commands Command Description snmp-server context Creates an SNMP context. snmp-server target list Creates an SNMP target list. Cisco ASR 14000 Series Router System Management Command Reference SMR-601 OL-17231-01...
Page 604 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 605 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 606 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 607 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 608 Creating and associating a context with a VPN enables a provider to prevent the users of one VPN from accessing information about users of other VPNs on the same networking device. Task ID Task ID Operations snmp read, write Cisco ASR 14000 Series Router System Management Command Reference SMR-606 OL-17231-01...
Page 609 Displays information about each SNMP group on the network. snmp-server host Specifies the recipient of an SNMP notification operation. snmp-server view Creates or updates a view entry. Cisco ASR 14000 Series Router System Management Command Reference SMR-607 OL-17231-01...
Page 610 If you do specify a security level, the default is noauth. community-string Password-like community string sent with the notification operation. We recommend defining this string using the snmp-server community command prior to using the snmp-server host command. Cisco ASR 14000 Series Router System Management Command Reference SMR-608 OL-17231-01...
Page 611 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 612 The following example shows how to send the SNMP traps to address 172.30.2.160: RP/0/RP0/CPU0:Router(config)# snmp-server traps snmp RP/0/RP0/CPU0:Router(config)# snmp-server host 172.30.2.160 public snmp The following example shows how to enable the router to send all traps to the host myhost.cisco.com using the community string public: RP/0/RP0/CPU0:Router(config)# snmp-server traps RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com public...
Page 613 Specifies the recipient of an SNMP notification operation. snmp-server traps bgp Enables BGP state-change SNMP notifications. snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notifications for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-611 OL-17231-01...
Page 614 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 615 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 616 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. Cisco IOS XR statistics infrastructure maintains a cache of statistics for all interfaces. This cache is updated every 30 seconds. Use the snmp-server ifmib stats cache command to enable the IF-MIB to retrieve these cached statistics rather than real-time statistics.
Page 617 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 618 Displays the ifIndex value for an SNMP interface. snmp-server engineid Specifies the identification number of the local SNMP engine. snmp-server ifindex persist Enables ifIndex persistence globally for all SNMP interfaces. Cisco ASR 14000 Series Router System Management Command Reference SMR-616 OL-17231-01...
Page 619 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 620 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 621 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Examples The following example shows how to set the precedence to 2: RP/0/RP0/CPU0:router(config)# snmp-server ipv4 precedence 2 Cisco ASR 14000 Series Router System Management Command Reference SMR-619 OL-17231-01...
Page 622 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 623 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 624 The following example configures the size of all logs to be 1500: RP/0/RP0/CPU0:Router(config)# snmp-server notification-log-mib globalSize 1500 Related Commands Command Description snmp-server Associates an SNMP community with an SNMP context, security name, or community-map target list. Cisco ASR 14000 Series Router System Management Command Reference SMR-622 OL-17231-01...
Page 625 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 626 Use the snmp-server queue-length command to define the length of the message queue for each trap host. After a trap message is successfully sent, the Cisco IOS XR software continues to empty the queue at a throttled rate to prevent trap flooding.
Page 627 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 628 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 629 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 630 SNMP Multiprotocol Label Switching (MPLS) Label • Distribution Protocol (LDP) traps. mpls traffic-eng—Enables SNMP MPLS traffic engineering traps. • msdp peer-state-change—Enables SNMP MSDP Peer state change trap. • ntp—Enables SNMP Cisco NTP traps. • Cisco ASR 14000 Series Router System Management Command Reference SMR-628 OL-17231-01...
Page 631 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 632 Specifies the recipient of an SNMP notification operation. snmp-server traps bgp Enables BGP server state-change SNMP notifications. snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notifications for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-630 OL-17231-01...
Page 633 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 634 Examples The following example shows how to enable the router to send BGP state-change notifications to the host at the address myhost.cisco.com using the community string defined as public: RP/0/RP0/CPU0:Router(config)# snmp-server traps bgp RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public...
Page 635 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 636 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description snmp-server traps Enables SNMP trap notifications. Cisco ASR 14000 Series Router System Management Command Reference SMR-634 OL-17231-01...
Page 637 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 638 Examples The following example shows how to enable the router to send OSPF error notifications to the host at the address myhost.cisco.com using the community string defined as public: RP/0/RP0/CPU0:Router(config)# snmp-server traps ospf errors RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public...
Page 639 Examples The following example shows how to enable the router to send OSPF link-state advertisement notifications to the host at the address myhost.cisco.com using the community string defined as public: RP/0/RP0/CPU0:Router(config)# snmp-server traps ospf lsa lsa-maxage RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public...
Page 640 Specifies the identification number of the local SNMP engine. snmp-server host Specifies the recipient of an SNMP notification operation. snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notifications for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-638 OL-17231-01...
Page 641 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 642 Specifies the identification number of the local SNMP engine. snmp-server host Specifies the recipient of an SNMP notification operation. snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notifications for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-640 OL-17231-01...
Page 643 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 644 Examples The following example shows how to enable the router to send OSPF state-change notifications to the host at the address myhost.cisco.com using the community string defined as public: RP/0/RP0/CPU0:Router(config)# snmp-server traps ospf state-change neighbor-state-change RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public...
Page 645 PIM interface. When the status is down, the notification signifies the loss of a PIM interface. PIM notifications are defined in the CISCO-PIM-MIB.my and PIM-MIB.my files that can be accessed from the SNMP Object Navigator, available through cisco.com at http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
Page 646 (RP) mapping information due to either Auto-RP or bootstrap router (BSR) messages. snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notification for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-644 OL-17231-01...
Page 647 Or a router can receive a register message from a multicast group in which it is not the RP. PIM notifications are defined in the CISCO-PIM-MIB.my and PIM-MIB.my files that can be accessed from the SNMP Object Navigator, available through cisco.com at http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
Page 648 (RP) mapping information due to either Auto-RP or bootstrap router (BSR) messages. snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notification for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-646 OL-17231-01...
Page 649 Use the snmp-server host command to specify which host or hosts receive SNMP notifications. PIM notifications are defined in the CISCO-PIM-MIB.my and PIM-MIB.my files that can be accessed from the SNMP Object Navigator, available through cisco.com at http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2. Task ID...
Page 650 (RP) mapping information due to either Auto-RP or bootstrap router (BSR) messages. snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notifications for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-648 OL-17231-01...
Page 651 Use the snmp-server host command to specify which host or hosts receive SNMP notifications. PIM notifications are defined in the CISCO-PIM-MIB.my and PIM-MIB.my files that can be accessed from the SNMP Object Navigator, available through cisco.com at http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2. Task ID...
Page 652 Enables PIM neighbor status down notifications. neighbor-change snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notification for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-650 OL-17231-01...
Page 653 Operations snmp read, write Examples The following example shows how to enable the device to send all traps to the host myhost.cisco.com using the community string defined as public: RP/0/RP0/CPU0:Router(config)# snmp-server traps snmp authentication RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com public snmp...
Page 654 Specifies the recipient of an SNMP notification operation. snmp-server traps bgp Enables BGP server state-change SNMP notifications. snmp-server traps syslog Enables SNMP notifications for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-652 OL-17231-01...
Page 655 Examples The following example shows how to enable Cisco-syslog-MIB error message notifications to the host at the address myhost.cisco.com, using the community string defined as public: RP/0/RP0/CPU0:Router(config)# snmp-server traps syslog RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public...
Page 656 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 657 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 When an SNMP trap is sent from a Cisco SNMP device, it has a notification address of the interface it happened to exit at that time.
Page 658 IDs. Before the Cisco IOS XR software tries to send a trap, it looks for a route to the destination address. If there is no known route, the trap is saved in a retransmission queue. Use the snmp-server trap-timeout command to determine the number of seconds between retransmission attempts.
Page 659 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Command Description snmp-server traps snmp Enables RFC 1157 SNMP notifications. snmp-server traps syslog Enables SNMP notifications for Cisco-syslog-MIB error messages. Cisco ASR 14000 Series Router System Management Command Reference SMR-657 OL-17231-01...
Page 660 After specifying the type of privacy password that follows, specify the privacy password for the priv-password argument: • priv-password—Unencrypted, clear-text privacy password. SDROwner (Optional) Limits access to the agents for the owner secure domain router (SDR) only. Cisco ASR 14000 Series Router System Management Command Reference SMR-658 OL-17231-01...
Page 661 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 662 The following example shows how to specify the command with a digest name of 00:11:22:33:44:55:66:77:88:99:AA:BB:CC:DD:EE:FF: RP/0/RP0/CPU0:Router(config)# snmp-server user user2 group2 v3 auth md5 encrypted 00:11:22:33:44:55:66:77:88:99:AA:BB:CC:DD:EE:FF Related Commands Command Description snmp-server group Configures an SNMP user group. Cisco ASR 14000 Series Router System Management Command Reference SMR-660 OL-17231-01...
Page 663 The predefined views supported on the Cisco IOS XR software, however, do not match the predefined views specified in RFC 3415. Cisco ASR 14000 Series Router System Management Command Reference...
Page 664 RP/0/RP0/CPU0:Router(config)# snmp-server view view1 1.3.6.1.2.1.1.7 excluded RP/0/RP0/CPU0:Router(config)# snmp-server view view1 1.3.6.1.2.1.2.2.1.*.1 included Related Commands Command Description show snmp view Displays information about the configured views. snmp-server group Configures an SNMP user group. Cisco ASR 14000 Series Router System Management Command Reference SMR-662 OL-17231-01...
Page 665 Defaults No default behavior or values Command Modes Global configuration Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-663 OL-17231-01...
Page 666 RP/0/RP0/CPU0:Router(config-snmp-vrf)# host 12.21.0.1 traps version 2c public udp-port 2525 Related Commands Command Description snmp-server context Creates an SNMP context. snmp-server host Specifies the recipient of an SNMP notification operation. Cisco ASR 14000 Series Router System Management Command Reference SMR-664 OL-17231-01...
Page 667 Terminal Services Commands on Cisco IOS XR Software This chapter describes the Cisco IOS XR commands used for setting up physical and virtual terminal connections, managing terminals, and configuring virtual terminal line (vty) pools. Cisco ASR 14000 Series Router System Management Command Reference...
Page 668 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 669 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 670 10 permit ipv6 host 2001:db8:2222:: any 20 permit ipv6 host 2001:db8:0:4::2 any Related Commands Command Description ipv4 access-list Defines an IPv4 access list by name. ipv6 access-list Defines an IPv6 access list by name. Cisco ASR 14000 Series Router System Management Command Reference SMR-668 OL-17231-01...
Page 671 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 672 RP/0/RP0/CPU0:router# configure terminal RP/0/RP0/CPU0:router(config)# alias test show ip interface brief; show users RP/0/RP0/CPU0:router(config)# line default RP/0/RP0/CPU0:router(config-line)# autocommand test RP/0/RP0/CPU0:router(config-line)# end Uncommitted changes found, commit them before exiting(yes/no/cancel)? [cancel]:yes RP/0/RP0/CPU0:router# exit Cisco ASR 14000 Series Router System Management Command Reference SMR-670 OL-17231-01...
Page 673 POS0/0/0/0 unassigned POS0/0/0/1 unassigned POS0/0/0/2 unassigned POS0/0/0/3 unassigned POS0/3/0/0 unassigned POS0/3/0/1 unassigned POS0/3/0/2 unassigned POS0/3/0/3 unassigned RP/0/RP0/CPU0:router# show users Line User Service Conns Idle Location vty0 telnet 00:00:00 172.16.0.0 Cisco ASR 14000 Series Router System Management Command Reference SMR-671 OL-17231-01...
Page 674 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 675 Defines and enables a customized banner that is displayed before the username and password login prompts. banner motd Defines a customized MOTD banner. banner Defines a customized banner that is displayed when there is a login timeout. prompt-timeout Cisco ASR 14000 Series Router System Management Command Reference SMR-673 OL-17231-01...
Page 676 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 677 Defines and enables a customized banner that is displayed before the username and password login prompts. banner motd Defines a customized MOTD banner. banner Defines a customized banner that is displayed when there is a login timeout. prompt-timeout Cisco ASR 14000 Series Router System Management Command Reference SMR-675 OL-17231-01...
Page 678 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 679 Defines a customized MOTD banner. banner Defines a customized banner that is displayed when there is a login timeout. prompt-timeout Cisco ASR 14000 Series Router System Management Command Reference SMR-677 OL-17231-01...
Page 680 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 681 Defines and enables a customized banner that is displayed before the username and password login prompts. banner Defines a customized banner that is displayed when there is a login timeout. prompt-timeout Cisco ASR 14000 Series Router System Management Command Reference SMR-679 OL-17231-01...
Page 682 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 683 Defines and enables a customized banner that is displayed before the username and password login prompts. banner motd Defines a customized MOTD banner. Cisco ASR 14000 Series Router System Management Command Reference SMR-681 OL-17231-01...
Page 684 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 685 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 686 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 687 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 688 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 689 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description show users Displays information about the active lines on the networking device. stopbits Sets the number of stop bits. Cisco ASR 14000 Series Router System Management Command Reference SMR-687 OL-17231-01...
Page 690 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 691 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 692 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 693 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description disconnect-character Defines a disconnect character. Cisco ASR 14000 Series Router System Management Command Reference SMR-691 OL-17231-01...
Page 694 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 695 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description absolute-timeout Sets the absolute timeout for line disconnection. session-timeout Sets the idle wait timeout interval for user input over a virtual terminal connection. Cisco ASR 14000 Series Router System Management Command Reference SMR-693 OL-17231-01...
Page 696 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 697 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 698 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 699 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Related Commands Command Description vty-pool Creates or modifies a vty pool. Cisco ASR 14000 Series Router System Management Command Reference SMR-697 OL-17231-01...
Page 700 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 701 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 702 Sets the maximum number of outgoing terminal sessions from the current terminal. show sessions Displays information about SSH and Telnet connections. telnet Logs in to a host that supports Telnet. Cisco ASR 14000 Series Router System Management Command Reference SMR-700 OL-17231-01...
Page 703 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 704 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 705 To use this command, you must be in a user group associated with a task group that includes the proper task IDs. Use the session-timeout command to set the interval that the Cisco IOS XR software waits for traffic before closing the connection to a remote device and returning the terminal to an idle state. If the output keyword is not specified, the session timeout interval is based solely on detected input from the user.
Page 706 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 707 Not been implemented on the Cisco IOS XR software. Uses Not been implemented on the Cisco IOS XR software. Noise Not been implemented on the Cisco IOS XR software. Cisco ASR 14000 Series Router System Management Command Reference SMR-705 OL-17231-01...
Page 708 Allowed transports are Incoming transport protocols that can be used by this tty to access the router. Cisco ASR 14000 Series Router System Management Command Reference SMR-706 OL-17231-01...
Page 709 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 710 IP address of the remote host. Service Remote connection service used. Idle Interval (in seconds) since data was last sent on the line. Conn Name Equivalent to the “Host” field in the Cisco IOS XR software. Related Commands Command Description disconnect Disconnects a network connection.
Page 711 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 712 Allowed transports are Incoming transport protocols that can be used by this tty to access the router. Cisco ASR 14000 Series Router System Management Command Reference SMR-710 OL-17231-01...
Page 713 An asterisk (*) indicates the current terminal session. To display all user groups and task IDs associated with the currently logged-in user, use the show user Note command in EXEC mode. See Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software. Task ID...
Page 714 Related Commands Command Description show line Displays the parameters of a terminal line. show user Displays all user groups and task IDs associated with the currently logged-in user. Cisco ASR 14000 Series Router System Management Command Reference SMR-712 OL-17231-01...
Page 715 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 716 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 717 RP/0/RP0/CPU0:router# terminal exec prompt no-timestamp Sun Aug 17 15:50:15.187 PST RP/0/RP0/CPU0:dt-ortho-8# show version Cisco IOS XR Software, Version 3.7.1.11I[SIT_IMAGE] Copyright (c) 2008 by Cisco Systems, Inc. ROM: System Bootstrap, Version 1.51(20080807:092259) [ASR 14000 ROMMON], dt-ortho-8 uptime is 2 days, 22 hours, 1 minute System image file is ''disk0:asr14k-os-mbi-3.7.1.11I/mbiasr14k-rp.vm''...
Page 718 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 719 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 720 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 721 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 722 Determines the protocols that can be used for outgoing connections from a line. transport Specifies the transport protocol that the Cisco IOS XR software uses if the user preferred does not specify one when initiating a connection. Cisco ASR 14000 Series Router System Management Command Reference...
Page 723 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 724 Defines which protocols to use to connect to a specific line of the router. transport preferred Specifies the transport protocol that the Cisco IOS XR software uses if the user does not specify one when initiating a connection. Cisco ASR 14000 Series Router System Management Command Reference...
Page 725 The Cisco IOS XR software assumes that any unrecognized command is a hostname and the software attempts a connection. When the protocol is set to none, the system ignores unrecognized commands entered at the EXEC prompt, and does not attempt a connection.
Page 726 Defines which protocols to use to connect to a specific line of the router. transport output Determines the protocols that can be used for outgoing connections from a line. Cisco ASR 14000 Series Router System Management Command Reference SMR-724 OL-17231-01...
Page 727 6 vtys (vty 100 through 105) referencing the default line template. Command Modes Global configuration Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-725 OL-17231-01...
Page 728 Before creating or modifying the vty pools, enable the Telnet server using the telnet server • command in global configuration mode. See Cisco IOS XR IP Addresses and Services Configuration Guide and Cisco IOS XR IP Addresses and Services Command Reference for more information.
Page 729 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 730 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Cisco ASR 14000 Series Router System Management Command Reference...
Page 731 C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1 Utility Commands on Cisco IOS XR Software This module describes the utility commands for the Cisco IOS XR software. Utility commands provide CLI equivalents to common UNIX commands.
Page 732 Use the online help system to display the available devices and network protocols. Defaults If an input file is not specified, the standard input (keyboard) is used. Command Modes EXEC Administration EXEC Cisco ASR 14000 Series Router System Management Command Reference SMR-730 OL-17231-01...
Page 733 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 734 Examples In the following example, the utility bc command is used to execute the be statements contained in the ASCII text file exp.txt: RP/0/RP0/CPU0:router# utility bc file disk0:/usr/exp.txt Cisco ASR 14000 Series Router System Management Command Reference SMR-732 OL-17231-01...
Page 735 (Optional) Displays the UNIX options supported by this command. WORD (Optional) UNIX command-line option string. The maximum number of characters is 20. Cisco ASR 14000 Series Router System Management Command Reference SMR-733 OL-17231-01...
Page 736 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 737 Admin In the following example, a range of fields is specified: RP/0/RP0/CPU0:router# utility cut fields 1-4 delimiter : file disk0:/usr/passwd root:x:0:1 daemon:x:1:1 bin:x:2:2 sys:x:3:3 adm:x:4:4 lp:x:71:8 uucp:x:5:5 nuucp:x:9:9 listen:x:37:4 Cisco ASR 14000 Series Router System Management Command Reference SMR-735 OL-17231-01...
Page 738 Sorts, merges, or sequence-checks the output displayed from standard input or a file. utility tail Copies the end portion of the output displayed from standard input or a file. Cisco ASR 14000 Series Router System Management Command Reference SMR-736 OL-17231-01...
Page 739 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 740 2006-08-28:02:09:58 RP/0/RP0/CPU0:router# utility date format "DATE: %y-%m-%d %nTIME: %H:%M:%S" DATE: 06-09-17 TIME: 12:42:24 Related Commands Command Description utility date set Sets the internal date and time of the router. Cisco ASR 14000 Series Router System Management Command Reference SMR-738 OL-17231-01...
Page 741 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 742 The following example shows how to set the time using the utility date set command: RP/0/RP0/CPU0:router(admin)# utility date set 13:07:00 Fri Sep 15 13:07:00 UTC 2006 Related Commands Command Description utility date Displays the internal date and time of the router. Cisco ASR 14000 Series Router System Management Command Reference SMR-740 OL-17231-01...
Page 743 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 744 RP/0/RP0/CPU0:router(admin)# utility df vfsStats /dev/hd0t6 /harddisk:/ Blocks: 9748468 total 9740769 avail [4096-byte blocks] Files : 0 total 0 avail Type : dos (fat32) Flags : 00000120 [32bit, noatime] Cisco ASR 14000 Series Router System Management Command Reference SMR-742 OL-17231-01...
Page 745 Amount of space available on the file system in 1-K blocks. Used Amount of disk space used by the directory or file. Available Amount of space available for use by the directory or file on the file system. Cisco ASR 14000 Series Router System Management Command Reference SMR-743 OL-17231-01...
Page 746 Mounted on Storage device where the file system is mounted. Related Commands Command Description utility du Displays the amount of disk space used by one or more directories or files. Cisco ASR 14000 Series Router System Management Command Reference SMR-744 OL-17231-01...
Page 747 Information for the current directory is displayed. Command Modes EXEC Administration EXEC Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Cisco ASR 14000 Series Router System Management Command Reference SMR-745 OL-17231-01...
Page 748 In the following example, the utility du command is used to display the disk space used for the current working directory: RP/0/RP0/CPU0:router# cd disk0:/asr14k-mpls-3.7.1 RP/0/RP0/CPU0:router# utility du 160 ./schema 104 ./lib/cerrno 625 ./lib/mib 2545 ./lib Cisco ASR 14000 Series Router System Management Command Reference SMR-746 OL-17231-01...
Page 749 Cisco ASR 14000 Series Router System Management Command Reference...
Page 750 If no files are specified, the keyboard input (standard input) is used. If more than one input file is specified, then the filename is displayed before each line. Command Modes EXEC Administration EXEC Cisco ASR 14000 Series Router System Management Command Reference SMR-748 OL-17231-01...
Page 751 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 752 6:lp:x:71:8:Line Printer Admin:/usr/spool/lp: 7:uucp:x:5:5:uucp Admin:/usr/lib/uucp: 8:nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico 9:listen:x:37:4:Network Admin:/usr/net/nls: 15:ssadmin:x:901218:60001:Sun StorEdge(tm) Configuration Service Agent Admin:/:/bin/false Related Commands Command Description utility fgrep Searches a file for a fixed character string. Cisco ASR 14000 Series Router System Management Command Reference SMR-750 OL-17231-01...
Page 753 The keyboard input (standard input) is used if no files are specified. If more than one input file is specified, then the filename is displayed before each line. Command Modes EXEC Administration EXEC Cisco ASR 14000 Series Router System Management Command Reference SMR-751 OL-17231-01...
Page 754 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 755 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 756 In the following example, the UNIX equivalent option is used to display files belonging to a specific user: RP/0/RP0/CPU0:router# utility find path disk0:/usr -user 0 disk0:/usr disk0:/usr/passwd disk0:/usr/test2.txt Related Commands Command Description utility which Locates a program file. Cisco ASR 14000 Series Router System Management Command Reference SMR-754 OL-17231-01...
Page 757 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 758 In the following example, the utility head command is used to display the first 15 lines from the output of the command show version: RP/0/RP0/CPU0:router# show version | utility head count 15 Cisco IOS XR Software, Version 3.7.1.11I[SIT_IMAGE] Copyright (c) 2008 by Cisco Systems, Inc. ROM: System Bootstrap, Version 1.51(20080807:092259) [ASR 14000 ROMMON], dt-ortho-8 uptime is 2 days, 22 hours, 5 minutes System image file is ''disk0:asr14k-os-mbi-3.7.1.11I/mbiasr14k-rp.vm''...
Page 759 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 760 RP/0/RP0/CPU0:router# utility less file disk0:/usr/config_store Last configuration change at Tue Feb 20 18:34:02 2007 by xxx hostname H1 line console exec-timeout 600 0 session-timeout 600 line default exec-timeout 600 0 session-timeout 600 Cisco ASR 14000 Series Router System Management Command Reference SMR-758 OL-17231-01...
Page 761 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 762 Sorts, merges, or sequence-checks the output displayed from standard input or a file. utility tail Copies the end portion of the output displayed from standard input or a file. Cisco ASR 14000 Series Router System Management Command Reference SMR-760 OL-17231-01...
Page 763 (Optional) (-o) Writes the results to a file. The filename is the destination disk, directory, and filename. The filename can be the same as the source file. Cisco ASR 14000 Series Router System Management Command Reference SMR-761 OL-17231-01...
Page 764 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 765 Copies the end portion of the output displayed from standard input or a file. utility head Copies bytes or lines at the beginning of the output displayed from standard input or a file. Cisco ASR 14000 Series Router System Management Command Reference SMR-763 OL-17231-01...
Page 766 20. Defaults If the utility tail command is entered without keywords or arguments, the last 10 lines of the standard input are copied. Command Modes EXEC Administration EXEC Cisco ASR 14000 Series Router System Management Command Reference SMR-764 OL-17231-01...
Page 767 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 768 Sorts, merges, or sequence-checks the output displayed from standard input or a file. utility head Copies bytes or lines at the beginning of the output displayed from standard input or a file. Cisco ASR 14000 Series Router System Management Command Reference SMR-766 OL-17231-01...
Page 769 (Optional) UNIX command-line option string. The maximum number of characters is 20. Defaults If no input file is specified, then the standard input is used. If no output file is specified, then the standard output is used. Cisco ASR 14000 Series Router System Management Command Reference SMR-767 OL-17231-01...
Page 770 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 771 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 772 In the following example, the utility wc command is entered with the words keyword to display the number of words in the output of the show version command: RP/0/RP0/CPU0:router# show version | utility wc words 1160 Cisco ASR 14000 Series Router System Management Command Reference SMR-770 OL-17231-01...
Page 773 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 774 In the following example, the utility which command is entered with the long keyword to display additional details about the perl program file: RP/0/RP0/CPU0:router# utility which long program perl -rwxrwxrwx 19245 Jul 28 14:31 /pkg/bin/perl Related Commands Command Description utility find Locates a file. Cisco ASR 14000 Series Router System Management Command Reference SMR-772 OL-17231-01...
Page 775 Command History Release Modification Release 3.7.1 This command was introduced on the Cisco ASR 14000 Series Router. Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs.
Page 776 EGRESS-GigabitEthernet0-0-0-0-104 disk0:/usr/atm.cfg:service-policy output EGRESS-GigabitEthernet0-0-0-0-105 disk0:/usr/atm.cfg:service-policy output EGRESS-GigabitEthernet0-0-0-0-106 disk0:/usr/atm.cfg:service-policy output EGRESS-GigabitEthernet0-0-0-0-107 disk0:/usr/atm.cfg:service-policy output EGRESS-GigabitEthernet0-0-0-0-108 disk0:/usr/atm.cfg:service-policy output EGRESS-common disk0:/usr/atm.cfg:service-policy output EGRESS-common disk0:/usr/atm.cfg:service-policy output EGRESS-common disk0:/usr/atm.cfg:service-policy output EGRESS-common disk0:/usr/atm.cfg:service-policy output EGRESS-common ..Cisco ASR 14000 Series Router System Management Command Reference SMR-774 OL-17231-01...
Page 777 Cisco ASR 14000 Series Router Multicast Command Reference Cisco ASR 14000 Series Router MPLS Command Reference cd command SMR-220 Cisco ASR 14000 Series Router Modular Quality of Service Command Reference cdp advertise v1 command SMR-50 Cisco ASR 14000 Series Router Routing Command Reference...
Page 778 SMR-257 install activate command SMR-341 env power-supply command SMR-258 install add command SMR-348 erase nvram install attach command SMR-353 command SMR-233 install auto-abort-timer stop command SMR-355 Cisco ASR 14000 Series Router System Management Command Reference SMR-776 OL-17231-01...
Page 779 SMR-18 SMR-243 mkdir command rollback configuration command SMR-240 SMR-144 monitor processes command SMR-520 root command SMR-146 monitor threads command SMR-524 route ipv4 command SMR-477 more command SMR-139 Cisco ASR 14000 Series Router System Management Command Reference SMR-777 OL-17231-01...
Page 780 SMR-398 command SMR-183 show install package command SMR-403 show configuration failed remove command SMR-184 show install pie-info command SMR-406 show configuration failed rollback command SMR-186 Cisco ASR 14000 Series Router System Management Command Reference SMR-778 OL-17231-01...
Page 781 SMR-479 snmp-server traps pim rp-mapping-change show users command SMR-711 command SMR-649 show variables boot command SMR-36 snmp-server traps snmp command SMR-651 show variables system command SMR-38 Cisco ASR 14000 Series Router System Management Command Reference SMR-779 OL-17231-01...
Page 782 SMR-320 utilitiy bc command SMR-730 utility cut command SMR-733 utility date command SMR-737 utility date set command SMR-739 utility df command SMR-741 utility du command SMR-745 Cisco ASR 14000 Series Router System Management Command Reference SMR-780 OL-17231-01...

Cisco ASR 14000 Series Management Command Reference

Related Commands

Command

Removes a Package from the Active Software Set

Quick Links

Related Manuals for Cisco ASR 14000 Series

Summary of Contents for Cisco ASR 14000 Series

Page 404: Table Of Contents

Page 407: Show Install Log

Page 415: Command

Page 416: Install Activate

Page 421: Install Rollback To

Table of Contents