Cisco ASR 14000 Series Hardware Installation Manual page 71

Chapter 5 Installing and Removing a PLIM or a SIP
PLIM or SIP Installation and Removal
If this PLIM or SIP is new, configure it for operation. For command syntax, refer to Cisco ASR 14000
Step 11
Series Router Interface and Hardware Component Command Reference.
Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
Warning
connected, avoid exposure to radiation and do not stare into open apertures. Statement 125
You can also keep the dust caps or covers on the laser optical bores to avoid radiation exposure.
Note
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
5-7
OL-17456-01