Physical Specifications; Identifying Slots And Subslots For Plim, Sip, And Spa - Cisco ASR 14000 Series Hardware Installation Manual

Identifying Slots and Subslots for PLIM, SIP, and SPA

Figure 2-3
1
Table 2-7
Table 2-7
LED Label
—

Physical Specifications

Table 2-8
Table 2-8
Description
Physical dimensions
(H x W x D)
Weight
Operating temperature
Storage temperature
Relative humidity
1. Short term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in one year. (This
Identifying Slots and Subslots for PLIM, SIP, and SPA
The following sections describe PLIM, SIP, SPA, and interface numbering:
•
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
2-6
Chapter 2 Overview: Cisco ASR 14000 Series Router Physical Layer Interface Module and SPA Interface Processor
Cisco ASR14K-20XGE-FL SIP Faceplate
1
A/L (Active/Loopback) LED
describes the Cisco ASR14K-20XGE-FL SIP LEDs.
Cisco ASR14K-20XGE-FL SIP LEDs
Color
Green
Amber
Off
shows the Cisco ASR14K-20XGE-FL SIP physical specifications.
Cisco ASR14K-20XGE-FL SIP Physical Specifications
refers to a total of 360 hours in any given year, but no more than 15 occurrences during that one-year period.)
PLIM or SIP Slot Locations on the Cisco ASR 14000 Series Router, page 2-7
2
SPA-DC192POS-XFP
CLEAN
B1
CONNECTOR
WITH ALCOHOL
WIPES BEFORE
CONNECTING
2 STATUS LED
State Meaning
On The PLIM is online and standing by.
On The PLIM has failed and needs to be replaced.
Off The PLIM is offline and deactivated.
Specifications
20.6 x 8.4 x 11.2 in. (52.2 x 3.8 x 28.4 cm)
Occupies one physical layer interface module (PLIM) slot on the
Cisco ASR 14000 Series Router
8.4 lb (3.8 kg)
Normal: 41 to 104°F (5 to 40°C)
•
1
Short term : 23 to 122°F (–5 to 50°C)
•
–40 to 158°F (–40 to 70°C)
Normal: 5 to 85%
•
1
Short term : 5 to 90% but not to exceed 0.024 kg of water per kg
•
of dry air
FF12
SPA-4XOC48PO ASR14K-20XGE-FL
OL-17456-01