Siemens ASM 456 Operating Instructions Manual page 10

Description
Potential
Ungrounded installation of the system is possible with the ASM 456. The following circuit
shows the internal relationships of the reference potentials.
Figure 2-3
Integration
The following figure shows how the ASM 456 is integrated in an automation system.
Figure 2-4
The ASM 456 is linked into STEP 7 by means of a GSD file. The ASM can then be
configured using HW Config of the SIMATIC Manager, the device configuration of the TIA
Portal or another PROFIBUS tool (e.g. operating mode). You will find the GSD file on the
DVD "RFID Systems, Software & Documentation" or on the Internet on the pages of
theIndustry online support (https://support.industry.siemens.com/cs/ww/en/view/72341852).
10
Potential isolation for ASM 456 (ground to shield)
Sample configuration ASM 456
Operating Instructions, 07/2015, J31069-D0162-U001-A6-7618
ASM 456 interface module