Revision History - Congatec Conga-TCA User Manual

Revision History

Revision Date (yyyy.mm.dd) Author Changes
0.1 2012.08.27
0.2 2013.03.13
1.0 2013.08.09
1.1 2016.10.10
Copyright © 2015 congatec AG
•
AEM Preliminary release
AEM • Added Microsoft Windows 8 support in section 1.2 "Supported Operating System"
•
Updated section 1.3 "Mechanical Dimension" and section 3 "Heatspreader" to reflect the actual heatspreader thickness
of 4mm
• Corrected the statement that the Intel® CG82NM10 (NM10) PCH found on the conga-TCA offers a single channel LVDS
interface in section 4.1.10 "LCD"
• Updated section 4.1.14 "Power Control"
• Deleted the wake event signal "PME#" from section 6.4 "ACPI Suspend Modes and Resume Events" because this signal is
not supported in COM Express type 6 specification
•
Updated section 9 "BIOS Setup Description"
• Added BIOS binary size in section 10 "Additional BIOS Features"
• Added section 10.1 "Supported Flash Devices"
AEM • Updated section 9 "BIOS Setup Description"
• Updated section 10.1 "Supported Flash Devices"
•
Official release
AEM • Added section 1 "Introduction". Moved COM Express concept and conga-TCA Options Information to section 1
"Introduction"
•
Added the maximum supported memory in sections 1 "conga-TCA Options Information" and 2.1 "Feature List"
• Added note in section 2.2 "Supported Operating Systems"
• Updated caution note in section 4 "Heatspreader"
•
Corrected the description of pins D63 and D64 in table 27 "Connector C-D Pinout
• Corrected the decoded I/O addresses in section 9.2.1 "LPC Bus"
• Updated the whole document
TCEDm11 2/96