Service Position To Check The Vtr Section - Sony DCR-PC101E Service Manual

[SERVICE POSITION TO CHECK THE VTR SECTION]

Connection to Check the VTR Section
To check the VTR section, set the VTR to the "Forced VTR power ON" mode. (Or, connect the control switch block (PS-2850) to the CN402
of ME-020 board and set the power switch to the "VIDEO" position.)
Operate the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and press the PAUSE
button of the adjustment remote commander.
Control switch block
(FK-2850)
Exiting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
When exiting the Forced VTR Power ON mode, connect the control
switch block (PS-2850) to the CN402 of ME-020 board. Or,
when ejecting the cassette, connect the control switch block (PS-1770)
to the CN402 of ME-020 board. and press the EJECT switch.
Adjustment remote
commander (RM-95)
ME-020 board
CPC-6 terminal board jig
(J-6082-371-A)
Mechanism deck
VC-284 board
AC power
AC IN
adaptor
2-13
DCR-PC101/PC101E
Control switch block
(PS-2850) (10P)
CPC-6 flexible jig
(J-6082-370-B)
BJ-003 board
DC-IN connector