Service Position To Check The Vtr Section - Sony DCR-TRV140 Service Manual

Ver 1.1 2003. 06

[SERVICE POSITION TO CHECK THE VTR SECTION]

Setting the "Forced VTR Power ON" mode (VTR mode)
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02, and press the PAUSE
button.
Mechanism deck
VC-273 board
FP-398 flexible board
Monitor TV
Video
[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Setting the "Forced Camera Power ON" mode (Camera mode)
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
Cabinet (R) assembly
Control switch block
(CF-2000)
VC-273 board
FP-398 flexible board
Monitor TV
Video
Control switch block
(FK-2000)
Mechanism deck
Control switch block
Lens assembly
(FK-2000)
DCR-TRV140/TRV140E/TRV140M
Exiting the "Forced Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Battery panel block
CPC jig connector
(J-6082-539-A)
Conductor side
Info lithium battery
(L series)
Adjustment remote
commander (RM-95)
Exiting the "Forced Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Battery panel block
CPC jig connector
(J-6082-539-A)
Conductor side
Info lithium battery
(L series)
Adjustment remote
commander (RM-95)
2-9
AC power
AC IN
adaptor
CN1011
I/F unit for LANC control
(J-6082-521-A)
AC power
AC IN
adaptor
CN1011
I/F unit for LANC control
(J-6082-521-A)