Camera Section Adjustments; Preparations Before Adjustment (Camera Section); List Of Service Tools - Sony DCR-PC101E Service Manual

DCR-PC101/PC101E

5-1. CAMERA SECTION ADJUSTMENTS

1-1.

PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)

1-1-1.

List of Service Tools

• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
ND filter 1.0
J-2 ND filter 0.4
ND filter 0.1
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
J-5
(Note 1)
J-6 Siemens star chart
J-7 Clear chart for pattern box
J-8 CPC-6 flexible jig (Note 2)
J-9 CPC-6 terminal board jig
J-10 Mini pattern box
J-11 Camera table
J-12 CPC-jig for LCD panel
Note 1: If the micro processor IC in the adjustment remote com-
mander is not the new micro processor (UPD7503G-
C56-12), the pages cannot be switched. In this case, re-
place with the new micro processor (8-759-148-35).
J-1
J-6
J-11
• Color monitor
• Digital voltmeter
Name
J-2 J-3
J-7 J-8
J-12
• Vectorscope
• Frequency counter
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A White balance check
J-6080-806-A White balance check
J-6080-807-A White balance check
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
For adjusting the video section
J-6082-370-B
For adjusting the color viewfinder
For adjusting the video section
J-6082-371-A
For adjusting the color viewfinder
J-6082-353-B For adjusting the flange back
J-6082-384-A For adjusting the flange back
J-6082-529-A For adjusting the LCD system
Note 2: The old CPC-6 flexible jig (J-6082-370-A) is also us-
able.
J-4
J-9
Fig. 5-1-1
5-4
Usage
J-5
J-10