White Balance Adjustment (Pd-166 Board) - Sony DCR-PC101E Service Manual

8. White Balance Adjustment (PD-166 board)

Correct the white balance.
If deviated, the LCD screen color cannot be reproduced.
Mode CAMERA
Subject Not required
Measurement Point Check on LCD screen
Measuring Instrument
Adjustment Page C
Adjustment Address 67, 68
Specified Value LCD screen must not be colored
Note 1: Check that the data of page: 0, address: 10 is "00".
Note 2: Check the white balance only when replacing the fol-
lowing parts. If necessary, adjust them.
1. LCD panel
2. Light induction plate
3. IC801
Adjusting method:
Order Page Address Data
1 0 01 01
2 C 67 7D
3 C 68 65
4
67
5 C
68
6 0 01 00
Note 3: To write in the non-volatile memory (EEPROM), press
the PAUSE button each time to set the data.
Procedure
Press PAUSE button.
Press PAUSE button.
Check that the LCD screen is
not colored. If not colored,
proceed to step 6.
Change the data so that the
LCD screen is not colored.
(Note 3)
5-41
DCR-PC101/PC101E