Table of Contents
Advertisement
Service processor problems
Service processor symptom Suggested action
Service processor reports a
general monitor failure.
1. If the blade server is operating, shut down the operating system.
2. If the blade server was not turned off, press the power-control button (behind the
blade-server control-panel door) to turn off the server.
3. Remove the blade server from the BladeCenter unit.
4. Wait 30 seconds and reinstall the blade server into the BladeCenter unit.
5. Restart the blade server.
If the problem remains, BladeCenter QS20 Problem Determination and Service
Guide.
Chapter 8. Solving problems
57
Advertisement
Table of Contents
