Table of Contents
Advertisement
Table 5. Explanation of LEDs and their states (continued)
LED
State
Power-on LED
Flashing rapidly
Flashing slowly
Lit continuously
(steady)
Not lit.
Explanation
Suggested action
The service
No action required
processor on the
blade server is
communicating with
the BladeCenter
management module.
The blade server has
Turn on if required
power but is not
turned on.
The blade server has
No action required
power and is turned
on.
Blade server not
1. Reseat blade
powered.
2. Check if
3. Go to "Power
Chapter 8. Solving problems
server.
BladeCenter
power supplies
numbers 3 and 4
are installed and
powered. If they
are not, install
and power them
or use slots 1-5.
problems" on
page 56
55
Advertisement
Table of Contents
