Verifying The Configuration; Feature Configuration - Cisco ASR 5000 Series Administration Manual

Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

▀ Verifying the Configuration

Verifying the Configuration
You can use a number of command to verify the configuration of your feature, service, or system. Many are hierarchical
in their implementation and some are specific to portions of or specific lines in the configuration file.

Feature Configuration

In many configurations, specific features are set and need to be verified. Examples include APN and IP address pool
configuration. Using these examples, enter the following commands to verify proper feature configuration:
show apn all
The output displays the complete configuration for the APN. In this example, an APN called apn1 is configured.
access point name (APN): apn1
authentication context: test
pdp type: ipv4
Selection Mode: subscribed
ip source violation: Checked drop limit: 10
accounting mode: gtpp No early PDUs: Disabled
max-primary-pdp-contexts: 1000000 total-pdp-contexts: 1000000
primary contexts: not available total contexts: not available
local ip: 0.0.0.0
primary dns: 0.0.0.0 secondary dns: 0.0.0.0
ppp keep alive period : 0 ppp mtu : 1500
absolute timeout : 0 idle timeout : 0
long duration timeout: 0 long duration action: Detection
ip header compression: vj
data compression: stac mppc deflate compression mode: normal
min compression size: 128
ip output access-group: ip input access-group:
ppp authentication:
allow noauthentication: Enabled imsi
authentication:Disabled
▄ Cisco ASR 5000 Series Mobility Management Entity Administration Guide
80
Verifying and Saving Your Configuration
OL-22987-01

Advertisement

Table of Contents
loading

Table of Contents