Information Required To Configure The System As An Mme; Required Local Context Configuration Information - Cisco ASR 5000 Series Administration Manual

Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

▀ Information Required to Configure the System as an MME

Information Required to Configure the System as an MME
This section provides a high-level series of steps and the associated configuration file examples for configuring the
system to perform as an MME node in a test environment. Information provided in this section includes the following:

Required Local Context Configuration Information

Required MME Context Configuration Information
Required eGTP Context Configuration Information
Required AAA Context Configuration Information
Required Local Context Configuration Information
The following table lists the information that is required to configure the local context on an MME.
Table 1. Required Information for Local Context Configuration
Required
Description
Information
Management Interface Configuration
Interface name
An identification string between 1 and 79 characters (alpha and/or numeric) by which the interface will be
recognized by the system.
Multiple names are needed if multiple interfaces will be configured.
IP address and
IPv4 addresses assigned to the interface.Multiple addresses and subnets are needed if multiple interfaces
subnet
will be configured.
Physical port
The physical port to which the interface will be bound. Ports are identified by the chassis slot number where
number
the line card resides followed by the number of the physical connector on the card. For example, port 17/1
identifies connector number 1 on the card in slot 17.
A single physical port can facilitate multiple interfaces.
Gateway IP address
Used when configuring static IP routes from the management interface(s) to a specific network.
Security
The name or names of the security administrator with full rights to the system.
administrator name
Security
Open or encrypted passwords can be used.
administrator
password
Remote access
The type of remote access that will be used to access the system such as telnetd, sshd, and/or ftpd.
type(s)
▄ Cisco ASR 5000 Series Mobility Management Entity Administration Guide
60
MME Service Configuration Procedures
OL-22987-01

Advertisement

Table of Contents
loading

Table of Contents