Associating Egtp Service And Mme-Hss Service; Configuring Dns Client Service - Cisco ASR 5000 Series Administration Manual

▀ MME Service Configuration
core-network id <cn_id>
end
Notes:
<ip_address> is the IP address of eNodeB.
<port_num> is the SCTP port on which MME service will communicate with eNodeB.
PLMN Id and Core-network Id indicates the MME‟s PLMN and core network in LTE network.

Associating eGTP Service and MME-HSS Service

Use the following example to configure the preconfigured eGTP service with S11 interface and MME-HSS service with
S6a interface on MME for S-GW and HSS respectively.
configure
context <vpn_ctxt_name>
mme-service <mme_svc_name>
associate egtp-service <egtp_svc_name> context <egtp_ctxt_name>
associate mme-hss-service <hss_svc_name> context <aaa_ctxt_name>
end
Notes:
<egtp_svc_name> is a preconfigured eGTP service configured in the system context
<egtp_ctxt_name>. For more information on eGTP service configuration, refer eGTP Service
Configuration section.
<hss_svc_name> is a preconfigured MME-HSS service configured in the system context
<aaa_ctxt_name>. For more information on MME-HSS service configuration, refer MME-HSS Service
Configuration section.

Configuring DNS Client Service

Use the following example to configure the DNS Client service on the system to use for locating S-GW and P-GW in
LTE network:
configure
context <dns_ctxt_name>
ip domain-lookup
ip name-server <ns_ip_address>
▄ Cisco ASR 5000 Series Mobility Management Entity Administration Guide
66
MME Service Configuration Procedures
OL-22987-01