Configuring S-Gw And P-Gw With Mme - Cisco ASR 5000 Series Administration Manual

MME Service Configuration Procedures
dns-client <dns_svc_name>
bind address <dns_ip_address>
default resolver {retransmission-interval | number-of-retries }
default cache { algorithm | size } { central | local }
default cache ttl { positive | negative }
round-robin-answers
end
Notes:
A maximum of 256 services (regardless of type) can be configured per system.
<dns_ctxt_name> is the system context name where DNS client service has to be configured. For more
informaiton on DNS clinet configuration parameters, refer DNS Client Service Configuration Mdoe Commands
in Command Line Interface Reference.
<ns_ip_address> is address of the IP name server which will be used to resolve the domain name. For more
informaiton on DNS clinet configuration parameters, refer DNS Client Service Configuration Mdoe Commands
in Command Line Interface Reference.

Configuring S-GW and P-GW with MME

Use the following example to configure the S-GW and P-GW with this MME service. It also associates the DNS service
to be used to locate S-GW and P-GW in EPC:
configure
context <vpn_ctxt_name>
mme-service <mme_svc_name>
sgw-address <sgw_ip_address> [ s5-s8-protocol pmip ] [ tai tac <tac_value>
[ mcc <mcc_value> mcc <mnc_value> ]] [ weight <value> ]
pgw-address <pgw_ip_address> [ s5-s8-protocol pmip ] [ weight <value> ]
dns { pgw | sgw } dns-service <dns_svc_name> context <dns_ctxt_name>
end
Notes:
<dns_svc_name> is a preconfigured DNS client service as configured in Configuring DNS Client Service
section.
Only one DNS client service can be associated with MME service.
OL-22987-01
Cisco ASR 5000 Series Mobility Management Entity Administration Guide ▄
MME Service Configuration ▀
67