4) How to use the pedal switch
A. Check the parameter, related to general sewing(function no.60), is set to "2" . If not, please set the
parameter to "2" .(Refer to 7.29) Change of parameter related to general sewing).
B. The pedal switch has three pedals, the right one ① moves the right upper feed plate, the intermediate one ②
moves the left upper feed plate and the left one ③ makes the sewing machine start.
C. Application (Basic)
ⓐ If you step on the intermediate pedal ②, the left upper feed plate descends to hold the sewing material.
ⓑ When you step on the right pedal ①, the right upper feed plate descends to hold the sewing material.
(When you step on the pedal ① again, the right upper feed plate ascends to the initial position)
ⓒ When both of the upper feed plates are descended, if you step on the left pedal ③, the machine starts.
※ This model does not have 2-step stroke option.
D. In case of using monolithic feed frame.
ⓐ Set the parameter, related to general sewing(function no. 60), to "0" .
ⓑ If you step on the intermediate pedal ②, the upper feed plate descends to hold the sewing material.
ⓒ After the upper feed plate descends, if you step on the left pedal ③, the machine starts sewing.
※ This model does not have 2-step stroke option.
44
②
①
③
②
③
②
①
③
①
③
②
①
③
②
①
[Fig. 65]
[Fig. 66]