SunStar SPS/B-2516 Series User Manual page 31

C. Setting the trimming shaft in place
ⓐ Unfasten the trimming drive link screw and the trimming shaft collar screw.
ⓑ Make the trimming shaft tip accord with part
ⓒ Tighten the screws.
[ Caution ]
If the position is not adjusted appropriately, trimming may not be operated correctly or the machine may
be struck.
Thread Trimmer Cam
D. Unfasten the link stopper in place
ⓐ Unfasten the trimming drive link stopper
screw while trimming is not operated and
have the trimming drive link and the
trimming drive link stopper notch 0.3mm
apart from each other.
ⓑ Tighten the screw.
[ Caution ]
If the link stopper is not set in the right
position, trimming may not be operated
correctly and the machine may be struck.
of the arm.
Thread Trimming
Driving Link
Screw
0.3mm
Thread
Trimmer
Driving
Link
Thread Trimmer Shaft
→
0.3mm Thread Trimmer
Driving Link Stopper
[Fig. 45]
Screw
[Fig. 46]
31