Installing Dsp Cards - Panasonic KX-NS500 Getting Started

2.2 Installing DSP Cards

2.2 Installing DSP Cards
CAUTION
•
Before touching the product (PBX, cards, etc.), discharge static electricity by touching ground or
wearing an earthing strap. Failure to do so may cause the PBX to malfunction due to static electricity.
•
When installing or removing the optional service cards, the power switch must be turned off.
•
When installing or removing the optional service cards, do not put pressure on any parts of the mother
board. Doing so may result in damage to the PBX.
Note
Make sure the AC power cord is not connected to the AC inlet of the PBX.
A DSP card is a digital signal processor card with DSP resources that can be used for VoIP calls, conferences,
the Unified Messaging feature, and the DISA/OGM feature. The DSP card is compliant with ITU-T G. 729A
and G.711 codec methods.
12 Getting Started