Panasonic KX-NS500 Getting Started page 41

KX-NT265 (Software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To enter the IP address of the PBX
VOL
Press VOLUME
to select "PBX".
To end programming
Press STORE.
•
Not using a DHCP server (DHCP Server feature or an external DHCP server) when the IP-PT is on
the same LAN as the PBX
Only the PBX's IP address can be assigned automatically to the IP-PT in the process of being registered
to the PBX. For details about registering the IP-PT, refer to "4.3.2 Registering IP Telephones".
Follow the procedure below to assign the IP address of the IP-PT, the subnet mask address, and the default
gateway address manually.
PROG.
Press PROGRAM
while "Searching" is displayed.
PBX IP
Address
Press SP-PHONE
twice.
The IP-PT will reboot
and can then be
registered to the PBX.
4.3.1 Assigning IP Addressing Information
HOLD
Press SP-PHONE. Press HOLD to return
to the Menu screen.
Getting Started 41