Table of Contents
Advertisement
6
Move
7
Max Camera Number
8
Information
9
Working Camera List
10
Export
11
Import
12
Save
13
Reload
There are three ways to add cameras to the Working Camera List:
To add cameras using the Search function:
1. Click the Search button.
2. In the dialog box, select a network interface card if you have more than one and click the
Search button again. IP devices in the LAN will be detected.
3. Select IP devices and click Add to add the cameras to the Working Camera List.
Select a camera and click Move to move the camera to
another channel.
Use the drop-down list to select the maximum number of
camera to be displayed in a page.
Shows the number of GV-IP Camera and third-party camera
supported by the USB dongle inserted.
Shows the cameras to be connected and recorded when the
GV-Recording Server is enabled.
Exports the camera connection information to an .hlt file.
Locate a previously exported .hlt file and import the camera
connection information.
Saves the current settings.
Reloads the page.
Figure 5-9
Administrator Mode
5
31
Advertisement
Table of Contents
