8 Ch
Channel
Function
1
Dimmer
2
Red
3
Green
4
Blue
5
Amber
6
White
7
Purple (UV)
8
Strobe
6 Ch
Channel
Function
1
Red
2
Green
3
Blue
4
Amber
5
White
6
Purple (UV)
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Auto Programs
Auto programs allow for dynamic RGBA color mixing without a DMX controller.
1.
Go to the Auto Show main level
2.
Select the desired auto (Auto 1-5)
3.
Select the desired speed (Speed 0-100)
The auto programs cannot be edited.
Master/Slave
The Master/Slave mode allows a group of COLORdash Par-H12 IP products (the slaves) to simultaneously
duplicate the output of another COLORdash Par-H12 IP (the master) without a DMX controller.
To set each of the slaves:
1.
Go to the Master/Slave Mode main level
2.
Select Slave
To set the master:
1.
Go to the Master/Slave Mode main level
2.
Select Master
3.
Select an auto program as explained in Auto Programs, or a static mix of colors.
•
The master is the one that runs a program whether in Auto, or Static Color
mode.
•
Do not connect a DMX controller to the products configured for Master/
Slave operation. The DMX controller may interfere with signals from the
master.
•
The master should be the first product in the daisy chain.
Page 16 of 22
Value
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
010
No function
011
255
Slow to fast
Value
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
255
0-100%
000
255
0-100%
COLORdash Par-H12 IP User Manual Rev. 1
O
PERATION
Percent/Setting
Percent/Setting