Table of Contents
Advertisement
M09416
®
Thermal Transfer Printer
2.13. Install SD Memory Card
1.
Turn the printer upside down.
2.
Remove the screw that fixes the memory card cover.
3.
Plug in a SD card on main board.
4.
Revert the memory card cover.
5.
Reassemble parts in reverse order following the procedures above
* Recommended SD card specification.
SD V 1.0, V 1.1
128MB
256MB
512MB
1GB
-Supported DOS FAT file system.
-Folders stored on the SD card should be in the 8.3 filename format.
-Approved SD card manufacturer: SanDisk, Transcend.
TTXLI
®
SD V 2.0 (SDHC)
4GB class 6
25
Screw
Memory Card Cover
SD Card
Advertisement
Table of Contents
