Replacing The Stepping Motor Bracket / Metal Assembly And Stepping Motor - Avery Dennison M09416 TTXLI Service Manual

M09416
®
Thermal Transfer Printer
2.6. Replacing the Stepping Motor Bracket / Metal Assembly
and Stepping Motor
1. Please refer to 3.1 for disassembling the lower cover and lower inner cover.
2. Disconnect all hardness.
3. Turn the lower inner cover upside down.
4. Remove 2 screws that fixed the stepping motor on the bracket
5. Remove the stepping motor.
Screws
6. Use a screwdriver to screw off 8 screws of the stepping motor bracket /
metal assembly.
TTXLI
®
Motor
14
Lower inner cover