Ubiquiti AMPLIFI User Manual page 6

Chapter 1: Getting Started
Installing the Mesh Points
For best performance, the Mesh Points should be placed
in opposite directions between the Router and the areas
farthest from the Router. Mesh multi-hop should only be
used when necessary, as performance will degrade with
each hop.
Best Performance
Mesh Multi-Hop
Mesh Point installation is optional and may not be
necessary in smaller homes.
1. Plug the Mesh Point into a power outlet.
2
2. After approximately one minute, the LEDs will reflect
signal strength, illuminating upward once the Mesh Point
is connected to the Router.
3. The Mesh Point antenna can be adjusted to provide
optimal signal coverage for your location.
Tip: If a Mesh Point is powered on and has been
configured with the app but does not appear online,
try relocating the Mesh Point closer to the Router.
AmpliFi User Guide