Ubiquiti AMPLIFI User Manual page 30

Chapter 5: Controls
Advanced
Client Details
The Client Details screen displays device and status
information about the client conected to your network.
• Details Tap to display additional device and status
information about the client device.
Hostname
Displays the descriptive name of the client
-
device.
Manufacturer
Displays the name of the client device
-
manufacturer.
Access Point Displays the name and icon of the Router
-
or Mesh Point, depending on which is connected to the
client device.
Signal
Displays the percentage of signal strength
-
between the client device and its access point (Router
or Mesh Point), as well as signal strength bars.
Band
Displays the radio band being used.
-
RX Bitrate
Displays the amount of receive (RX) data
-
transmitted per second.
TX Bitrate Displays the amount of transmit (TX) data
-
transmitted per second.
MIMO
Displays the number of TX and RX MIMO
-
(Multiple Input, Multiple Output) streams used by the
client.
IP Address Displays the IP address assigned to the
-
client device.
MAC Address
Displays the hardware identifier of the
-
client device.
Lease valid Displays the duration of time its IP address
-
is valid for.
26
• Create static lease Tap to map a static IP address to the
client device.
Name
The hostname of the client device is
-
automatically displayed. If you want to change it, tap to
edit the name.
MAC Address The MAC address of the client device is
-
automatically displayed. If you want to change it, tap to
edit the MAC address.
IP Address
The currently assigned IP address is
-
automatically displayed. If you want to change it, tap to
select another IP address.
Tap to save your changes.
AmpliFi User Guide