Ubiquiti AMPLIFI User Manual page 20

Chapter 2: Overview
Port Forwarding
The Port Forwarding screen in the app allows you to set
up port forwarding rules. Typically you configure a port
forwarding rule so a host on the external network can access
a server on the internal network by using the public IP
address (or hostname) of the Router.
To create a port forwarding rule, tap +.
Name
Enter a descriptive name for this rule.
-
IP Address Enter the LAN IP address that will receive
-
the forwarded port traffic.
Source Port
Enter the port or ports that will be
-
forwarded to the LAN. You can identify the port or ports
by name, number, and/or range. To specify multiple
ports, use a comma-separated list.
Example: https,20-23,554
Dest. Port
Enter the port or ports that will receive the
-
forwarded port traffic. You can identify the port or ports
by name, number, and/or range. If you do not specify
this port, then the original destination port of the traffic
will be used.
Protocol Select the appropriate protocol: TCP, UDP, or
-
TCP & UDP.
Tap to save your changes.
16
Information
About
The About screen for the Router displays the model name
and version numbers of the device and software, as well as
the MAC addresses of the hardware interfaces.
Device
Model Name
• Displays the model of the Router.
Hardware Revision
• Displays the revision number of the
Router hardware.
Software
Version
• Displays the version number of the Router
software.
• Revision Displays the revision number of the Router
software.
AmpliFi User Guide