Ubiquiti AMPLIFI User Manual page 19

AmpliFi User Guide
Address
The range of available IP addresses is displayed. The DHCP
server assigns IP addresses from the pool (or group) of IP
addresses.
DHCP Settings
Range
• The current range is displayed. Select the range
you want to use.
Subnet
• The current subnet is displayed. Select the subnet
you want to use.
Start
• The current starting IP address of the range is
displayed. Select the starting IP address you want to use.
• End The current ending IP address of the range is
displayed. Select the ending IP address you want to use.
Lease Validity
• The IP addresses assigned by the DHCP
server are valid only for the duration specified by the lease
time. Increasing the time ensures client operation without
interruption, but could introduce potential conflicts.
Decreasing the lease time avoids potential address
conflicts, but could lead to minor interruptions for the
client while it acquires a new IP address from the DHCP
server. Select the appropriate option: 1 hour, 2 hours,
4 hours, 8 hours, 12 hours, 1 day, 1 week, or 1 month
(30 days), or 1 year (365 days).
Tap to save your changes.
Static Leases
• Select this option to display a list of static IP
addresses assigned to specific devices.
Port Forwarding Tap this option to create a virtual port
that allows you to forward traffic from one port to another.
Information
About
Tap this option to display router information, version
numbers, and MAC addresses for each of the hardware
interfaces.
Firmware Update
Tap this option to check for firmware
updates for your AmpliFi devices.
General
The General screen allows you to access device settings. Tap
to save your changes.
2.4 GHz
Automatic Enabled by default. Disable this option to
-
specify a channel setting.
Channel
Select the appropriate channel to use.
-
Bandwidth
Select the appropriate channel width,
-
20 MHz or 20/40 MHz.
5 GHz
Automatic
Enabled by default. Disable this option to
-
specify a channel setting.
Channel Select the appropriate channel to use.
-
Bandwidth Select the appropriate channel width,
-
20 MHz, 40 MHz, or 80 MHz.
Tap to save your changes.
To map a static IP address to a specific MAC address, tap +.
Name Enter a descriptive name for the device that will
-
be assigned a static IP address.
MAC Address
Enter the MAC address of the device.
-
IP Address
Select the IP address you want to assign.
-
Tap to save your changes.
Chapter 2: Overview
15