Additional Settings; Dhcp Server - Ubiquiti AMPLIFI User Manual

Chapter 2: Overview
Show Password
• Disabled by default. Select this option to
display the password in plain text.
Security
• Select the type of wireless security you use:
None, WPA PSK, or WPA2 PSK (recommended). WPA2 PSK
is the default.
• Hidden SSID Disabled by default. Select this option if
you don't want the wireless network name or SSID to be
broadcast.
Guest
SSID Name
• The name of the guest wireless network is
displayed. Tap to change it.
• Password The password to the guest wireless network is
displayed. Tap to change it.
Verify Password
• To change the guest password, enter
the new password again.
• Show Password Disabled by default. Select this option to
display the guest password in plain text.
Security
• Select the type of wireless security you use:
None, WPA PSK, or WPA2 PSK. None is the default.
• Hidden SSID Disabled by default. Select this option if you
don't want the wireless network name or SSID to be visible
to any users within range of the Router.
Other
• Country Select your country.
Band Steering
• Band steering directs your devices to the
5 GHz band for higher performance. If the Router's signal
weakens, it redirects to the 2.4 GHz band (which has
more range). Enabled by default, you can disable it and
manually select 2.4 or 5 GHz.
14
Router Steering
• Router steering directs devices to
connect to the Router instead of Mesh Points when
possible (even if the Router signal is weaker). Disabled
by default, this feature may provide faster speeds when
enabled in some instances.
• Separate Wi-Fi SSID Disabled by default. Select this
option to create separate wireless networks for the
2.4 GHz and 5 GHz radio bands.
This may be helpful if you want more control over which
radio band a client device uses. For example, if your device
can use the 5 GHz radio band and it is within range, then
the best option is to connect to the 5 GHz network.
Tap to save your changes.
Advanced
• Select this option to customize the wireless
settings for the 2.4 GHz and 5 GHz radio bands.
Brightness
LCD Move the slider control left or right to adjust the
brightness of the touchscreen display.
LED
Move the slider control left or right to adjust the
brightness of the LED that illuminates the base of the Router.
Night Mode
Toggle the switch on or off to enable or
disable power-saving mode for the touchscreen display. This
option is enabled by default.
Begins Set the time you would like the touchscreen display
to turn off. This setting is only available when Night Mode is
enabled.
Ends Set the time you would like the touchscreen display to
turn back on. This setting is only available when Night Mode
is enabled.
Note: Scroll down on the Settings screen to view
additional configuration options.

Additional Settings

Advanced

DHCP Server

The DHCP Server screen allows you to access the DHCP
settings, which determine how IP addresses are assigned
in your network. By default, the Router acts as a local DHCP
server to assign IP addresses to DHCP clients (devices such
as computers and smartphones) on the network. If you
modify any of these fields, tap
AmpliFi User Guide
to save your changes.