24/10/2022, 12:04 ACB-AC Quick Start Guide ACB-AC Quick Start Guide This Gigabit Ethernet port is available to connect a 10/100/1000 Mbps device to the internet. It also accepts 24V PoE input and can be used to power the airCube. Ports 2-3 These Gigabit Ethernet ports are available to connect 10/100/1000 Mbps devices to the internet.
24/10/2022, 12:04 ACB-AC Quick Start Guide ACB-AC Quick Start Guide Web UI Configuration To configure the airCube using a web interface: 1. Launch your web browser and go to: https://192.168.1.1 NOTE: The device used to configure the airCube must be on the same network as the airCube itself.
24/10/2022, 12:04 ACB-AC Quick Start Guide NOTE: The QR code password can be found on the bottom of the ACB-AC Quick Start Guide airCube. It is labeled PSWD. 3. Follow the on-screen instructions. Specifications ACB-AC Dimensions 87.80 x 89.50 x 89.25 mm (3.46 x 3.52 x 3.51") Weight 280 g (9.88 oz)
24/10/2022, 12:04 ACB-AC Quick Start Guide WARNING: Do not use this product in location that can be submerged by water. ACB-AC Quick Start Guide WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
24/10/2022, 12:04 ACB-AC Quick Start Guide uses, and can radiate radio frequency energy and, if not installed and used in accordance with ACB-AC Quick Start Guide the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:...
24/10/2022, 12:04 ACB-AC Quick Start Guide ACB-AC Quick Start Guide AVIS IMPORTANT : Déclaration sur l’exposition aux rayonnements : Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements dans un environnement non contrôlé. Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il y ait une distance minimale de 20 cm entre l’élément rayonnant et vous.