Emerson Micro Motion 3500 Installation Manual page 22

Wiring
Figure 3-12: Shield drain wires wrapped twice around exposed shield foil
e. Place the shielded heat shrink over the exposed shield drain wires. The tubing
f. Without burning the cable, apply heat (250 °F or 120 °C) to shrink the tubing. See
Figure 3-13: Shielded heat shrink covering exposed drain wires
g. Position the gland clamping insert so that the interior end is flush with the heat
h. Fold the cloth shield or braid and drain wires over the clamping insert and
Figure 3-14: Folded cloth
i. Install the gland body into the core processor housing conduit opening. See
22
should completely cover the drain wires.
Figure 3-13.
shrink.
approximately 1/8 inch (3 mm) past the O-ring. See
3-15.
Model 3500 Transmitters or Model 3300 Peripherals - Panel Mount
Figure 3-14.
Figure