Danfoss ECL Comfort 310 Operating Manual page 4

Operating Guide
4 DEN-SMT/DK
ECL Comfort 310, application A368
As this Installation Guide covers several system types, special system
settings will be marked with a system type. All system types are shown
in the chapter: 'Identifying your system type'.
°C (degrees Celsius) is a measured temperature value whereas K
(Kelvin) often is used for temperature differences.
The ID no. is unique for the selected parameter.
Example First digit
11174 1
-
12174 1
-
If an ID description is mentioned more than once, it means that there
are special settings for one or more system types. It will be marked
with the system type in question (e.g. 12174 - A266.9).
Parameters indicated with an ID no. like "1x607" mean a universal
parameter.
x stands for circuit / parameter group.
Disposal Note
This product should be dismantled and its components
sorted, if possible, in various groups before recycling
or disposal.
Always follow the local disposal regulations.
VI.LG.J3.02
Second digit Last three digits
1 174
Circuit 1 Parameter no.
2 174
Circuit 2 Parameter no.
Danfoss District Energy