Safety Information - Kranzle W 11/135 Original Operating Manual

Safety Information

Important !!!
The machine must be disconnected from the power supply when ser-
vicing work is being carried out. The master switch should be in position
„0" and the plug out of the socket.
Do not use the cleaner if electrical connections or other safety-relevant
parts (e.g. overpressure valve, high pressure hose, spraying equipment
etc.) are damaged.
The machine may only be used by persons who have received the neces-
sary training.
Never operate the machine without supervision.
The water spray can be dangerous. It should never be directed at people, animals,
electrical apparatus or the machine itself.
Never direct the spray at power sockets.
Parts of the machine interior and parts of the gun and lance become hot when hot water
is used. Leave the cover of the machine closed when using the machine and do not
touch the metallic parts of the gun and lance.
Children must not use high pressure cleaning equipment.
Do not damage the cable or repair it incorrectly.
Do not pull the high pressure hose if there are kinks or loops in it. Make sure that the hose
is not damaged on sharp edges.
Persons operating the machine should wear the necessary protective clothing, i.e., wa-
terproof clothing, rubber boots, safety goggles, headwear etc. It is prohibited to use the
machine in close vicinity to people lacking suitable protective clothing.
The high pressure spray can generate a high level of noise. If noise exceeds the maximum
allowed levels, users and others in the vicinity must wear suitable ear protection.
The high pressure spray causes recoil and additional twisting movement if the gun is angled.
The gun must therefore be held firmly with both hands. (see page 2)
Do not clamp down the trigger of the gun. Apply the safety catch after use, in order to
prevent accidental spraying.
Do not spray against matter containing asbestos or other hazardous substances.
Never spray liquids containing solvents, such as paint thinner, petrol, oil, or anything simi-
lar. Note the specifications of the additive makers! The seals in the machine are not
resistant to solvents. The spray vapour of solvents is highly inflammable, explosive and
poisonous.
Safety Information
13