Runtime Switching Software Default Settings; Switch A And Switch B: General Default Settings - HP ProLiant BL p-Class GbE2 User Manual

This section provides the default settings for the GbE2 Interconnect Switch:
•
Table D-1 contains general default settings for both Switch A and Switch B
•
Table D-2 contains Port Names, VLANs, STP/ByPass, Trunking Default Settings for
Switch A
•
Table D-3 contains Port Names, VLANs, STP/ByPass, Trunking Default Settings for
Switch B

Switch A and Switch B: General Default Settings

Switch A and Switch B are configured with the following general default settings:
Table D-1: Switch A and Switch B: General Default Settings
Setting
Notice
Banner
User Names/Passwords
BOOTP Service
IP Address (if manual IP option is
selected)
Subnet Mask (if manual IP option is
selected)
Primary Default Gateway
Secondary Default Gateway
Primary DNS Server Address
Secondary DNS Server Address
Default Domain Name
HP ProLiant BL p-Class GbE2 Interconnect Switch User Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331399-001 Last Saved On: 7/17/03 2:29 PM

Runtime Switching Software Default Settings

Value
None
None
User Name :
•
user—Enabled
•
oper—Disabled
•
admin—Enabled (cannot be
disabled)
Enabled
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
None
D
Password :
•
user
•
None
•
admin
continued
D-1