Ricoh Pro C5200s User Manual page 269

Message
"Exceeded maximum
number of file to store.
Delete all unnecessary files."
When the WSD scanner function cannot be used
Message
"Cannot communicate with
PC. Contact the
administrator."
"Cannot start scanning
because communication was
failed."
"Cannot start scanning
because communication was
failed."
"Cannot start scanning.
Check the setting(s) on the
PC."
Messages Displayed When You Use the Scanner Function
Cause
Too many files are waiting to
be sent.
Cause
WSD (Device) protocol or
WSD (Scanner) protocol is
disabled.
Scan Profile is not set on the
client computer.
The [Take no action] setting
has been selected on the
client computer, forcing the
client computer to remain
inactive when it receives
scan data.
The Scan Profile might be
incorrectly configured.
Solution
Try again after they have been sent.
Solution
For details about how to enable or
disable the WSD protocol, see
"Enabling and Disabling Protocols",
Security Guide.
Set Scan Profile. For details about how
to do this, see "Creating a New Scan
Profile", Scan.
Open scanner properties, click the
[Events] tab, and then select [Start this
program] as the computer's response
when it receives scan data. For details,
see your operating system's Help.
Check the Scan Profile configuration.
267