8. Adding Paper and Toner
7.
While holding the paper guides with your hands, lock both of the paper guides again.
Make sure that the total of the gaps between the paper and the front and rear paper guides does
not exceed 0.75 mm (0.03 inches).
Closing the multi bypass banner sheet tray
1.
Lightly pull up the extender, and then fold it into the machine.
2.
Raise the multi bypass banner sheet tray towards the machine until it clicks, and then tilt it
to the opposite side.
3.
Push the multi bypass banner sheet tray into its original position.
176
DRB185
1
2
DRB186
DRB187