Ricoh Pro C5200s User Manual page 251

Message
"Sending data failed."
"The selected paper size is
not supported. This job has
been cancelled."
"The selected paper type is
not supported. This job has
been cancelled."
"Staple error occurred. The
job has been cancelled."
"Error occurred while
printing job with Background
Numbering. Job has been
cancelled."
"Communication error with
central management server
has occurred. Job was
cancelled."
Cause
The machine received a
command to stop
transmission from the printer
driver.
Job reset is automatically
performed if the specified
paper size is incorrect.
Job reset is automatically
performed if the specified
paper type is incorrect.
The maximum number of
sheets that can be stapled
together has been exceeded
when [Cancel Printing] is
selected in [When Excdd
Max. No. of Sheets for
Booklet] under Printer
Features.
Unprintable paper size was
selected, or slip sheet
printing was specified when
Background Numbering
printing was performed.
The job was canceled
because a Central
Management
communication error
occurred.
Messages Displayed When You Use the Printer Function
Solution
Check if the computer is working
correctly.
Specify the correct paper size, and
then print the file again.
Specify the correct paper type, and
then print the file again.
Check the number of sheets that are to
be stapled together, and try printing
again.
For details about the number of sheets
that can be stapled together, see
"Specifications for Finisher SR4120",
"Specifications for Booklet Finisher
SR4130", "Specifications for Finisher
SR5070", or "Specifications for
Booklet Finisher SR5080" in
Maintenance and Specifications.
Check the setting of Background
Numbering printing in the printer
driver.
For details about configuring the
printer driver settings, see the printer
driver Help.
Also note that Background Numbering
printing cannot be applied to slip
sheets.
Check the status of the Central
Management machine.
249