Ricoh Pro C5200s User Manual page 288

10. Information for This Machine
• The default period the machine waits before entering Low Power mode is 15 minutes. This
default time can be changed.
Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 60 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
•
Reduced electrical consumption in
Low Power mode
Time of switch into Low Power mode
Time of switch out from Low Power
*1*2
mode
Reduced electrical consumption in
Sleep mode
Time of switch into Sleep mode
Time of switch out from Sleep mode
*1
Duplex Function
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2 Image adjustment may take around 100 seconds.
*3 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used
with) a duplex tray and the duplex function is enabled as an option.
•
Reduced electrical consumption in
Low Power mode
286
(mainly Europe)
*1
*1
*3
(mainly North America)
*1
Type 1
154 W
15 minutes
31.7 seconds
0.75 W
60 minutes
119 seconds
Standard
Type 1
154 W
Type 2
152 W
15 minutes
32.8 seconds
0.75 W
60 minutes
119 seconds
Standard
Type 2
154 W